Nissan Micra sport 2008 immo synchro help !!

[Basti13]

Hello all i have problem with Micra , ecu MEC93-090 loose synchr to BCM . Old BCM is damaged and no synch i change to new BCM program key (normal PCF7946) remote work but i cant make synchro to ecu . Any help ??Pin code is 7ABD6B57C55B

[keygargoil]

was it a new key or old key

[Basti13]

New key programed

[Basti13]

Any help ??

[Basti13]

How i can get 4 digit pin code for this ??

[albertros]

Hi
its 12digit code
post number from label in glove box

[Basti13]

I have 12 digit code but Consult III want 4 digit password for resynch Immo- ECU ?? 12 digit pin is 7ABD6B57C55B

[super jumbe]

Programming micra keys is like Russian roulette, need more info this micra diesel/petrol and engine capacity and post number from label in the glove box.

[Basti13]

Hello this is Micra sport K12 petrol 1.6 2007 plate numbers in glove box K126019162 E6FE517984AC 06075083 but BCM is changed !!!
If you can give me pin code from this pls i want check something .

[Basti13]

I need help from Nissan specialist !!!!

[forumoto]

so how did you solve this issue finally, or did you gave up and send it to dealer

[Basti13]

Not give up but no time car wait for my time :)

[super jumbe]

Not give up but no time car wait for my time :)

Sorry been very busy, if you still have the old BCM just remove eeprom 95080 and replace it to the new BCM and let us know how you got on, micra one of the worse cars to get syncho with BCM, you may have to programme keys more then 3 times to start micra.

[Basti13]

Old is damaged , i have brand new bcm , key is programmed but i cannot synchronize with ecu ( I bought even security card for consult 3 :) ) but for c/u inicjalization i need 4 digit pass code i have just 12 digit pass for key .I dont know where i can find 4 digit pin ( ecu ? bcm ?)

[Basti13]

Still this car wait for help :)

[forumoto]

How bad is the old bcm, we re just looking for a replacement of IC ship being mentioned by super jumbe (http://www.digital-kaos.co.uk/forums/members/27064-super-jumbe/), that IC 95080, just take this IC from the old damaged bcm and put on on the new one, in this junction you will need hot air gun to solder and desolder the ic from the old to the new one, can you share picture with good quality image of the old bcm PCB, we want to see how damage you re talking about...

Secondly in consult 3 plus, when you go to immobilizer section, you will see Replace BCM, and Key registeration function, just select replace bcm, and follow the screen it will ask you for pin, this section has a space of inputting the pin, and put in 12 pin get from the vin or letter box, can you give me the pin, i will ask a guy for you, secondly, the software for the nc3+, did you install the EUROPE VERSION of the nissan, or america, because i have install clone nc3+ and got all the cars for europe which contain this car in question you re dealing with

[Basti13]

Problem is my friend not damaged board , but corupted software in 95080 .Secondary i have Consult 3 not plus with security card :)

[forumoto]

Problem is my friend not damaged board , but corupted software in 95080 .Secondary i have Consult 3 not plus with security card :)


you have not answer vital part of my question and that is, TELL ME what are the functions in the immobilizer section when you press immobilizer on the software page of NC3, Just as i have mentioned mine to you,that in the Immobilizer section, i can see Registeration of Key, and BCM replacement. what you do see inside yours, and also do you see c/u initialization as a separate function, can you take a screen print of your immo function, and attach here please i want to see what are the functions in there. thank you