PDA

View Full Version : Help to find a solution for 5P08C3 EEPROM



einet
20th March, 2014, 08:08 PM
Hi all

I need o know is it possible to change this eeprom 5P08C3 from a PSA EDC15C2 with outher eeprm?

thanks
einet

ammarben
22nd March, 2014, 08:02 AM
no you can't

darrenhyland
22nd March, 2014, 10:50 AM
Do you want to swap immo info from old ecu to donor one?........if so then you can swap 5p08 eeprom but you most likely will need to swap the 29f flash chip aswell.

Meat-Head
22nd March, 2014, 12:28 PM
CONFUSED


95080 or 25080 should do the job BUT, when i was playing with myself late at night, it seemed best to use selected eeprom rather than another device selection


edc15c2. Get 400 degree of heat for 60 seconds, then left/right with tweesers, then place the hot chip on the mineral case to cool

einet
22nd March, 2014, 04:13 PM
I bay some eeproms!