ghostridersa
28th March, 2014, 12:44 PM
I have a Audi RS4 2007 with dual ecu's in my shop with a no start issue. History behind the problem is that the owner tried to tune the vehicle himself with Dimsport software and while writing the files the battery went flat and the Dimsport froze and now vehicle does not start at all and does not even crank over.
I suspect that both ecu's have locked themselves.
I have posted all info on vehicle below including a vcds scan and part numbers of both the left and right ecu's. I would be most grateful if any members could give any advice on this vehicle and maybe standard files for both left and right ecu's.
Many thanks in advance
Audi RS4
Vin: WAUZZZ8E37N901235
Engine: BNS 005537
Both Ecu's same part number: Bosch MED9.1
8E1 910 560 B
8E1 907 560 HW: H13
0 261 S02 205
I suspect that both ecu's have locked themselves.
I have posted all info on vehicle below including a vcds scan and part numbers of both the left and right ecu's. I would be most grateful if any members could give any advice on this vehicle and maybe standard files for both left and right ecu's.
Many thanks in advance
Audi RS4
Vin: WAUZZZ8E37N901235
Engine: BNS 005537
Both Ecu's same part number: Bosch MED9.1
8E1 910 560 B
8E1 907 560 HW: H13
0 261 S02 205