PDA

View Full Version : Toyota Hilux D-4-D, Unable to start, Immo module file was Blank...



irwin88
31st March, 2014, 09:35 AM
This car unable to start and towed to my shop, found out the ECU immo Toyota 89780-71021 file was blank. Anyone have a replacement immo file for this immo module ? The car key is 4D. ECU 89661-0K410. Thanks in advance !

ecufix
31st March, 2014, 11:42 AM
Load this into the RA57 on ecu (93c56b) and leave immo ecu unplugged , pass free ,regards

irwin88
1st April, 2014, 05:34 AM
Hi Ecufix, the car crank and started for about 2 seconds, after then it immediately shut down again. Please advise.

ecufix
1st April, 2014, 07:53 AM
This is only a solution for an immobilizer error ie code 99,the chip number is IC 901 and is only for the diesel ecu ,regards

bram380
1st April, 2014, 08:42 AM
Read ecu eprom & key id67.
post here both

irwin88
2nd April, 2014, 07:03 AM
Hi Bapak Bram, ECU Files and Key Data for your reference
Key 1 P1: 32 P2: 35 P3: 01 ED D0 40 P4: 5C AB FF 17 35
Key 2 P1: 32 P2: 35 P3: D1 3B 33 16 P4: FD 05 39 17 35
Key 3 P1: 32 P2: 35 P3: 01 EF 92 40 P4: 5C AC FB 17 35

Thanks in advance

bram380
2nd April, 2014, 12:39 PM
to start this hilux need:
- immo data.
- ecu data (posted)
- key data. (posted)

irwin88
2nd April, 2014, 02:23 PM
Pak Bram, immo data was blank/erased by someone before me... any chance to write a new immo data that can fit into it ?
Or anyone have a second hand/used Hilux immo file for me to fit in...


Finally Problem SOLVED !
>> Must THANKED GWEE for his valuable input.