PDA

View Full Version : Renault CLIO 1,4 S110030304C 7700115097 IMMO OFF



joe1953
31st March, 2014, 10:09 AM
Hello,

i have Renault Clio 1,4 , year 1999, Aircondition yes and want make IMMO OFF. It is very urgent. Customer is here come from 200 km and does have solution.

Can someone please help mee to solve this problem....

here is dump:

skens
31st March, 2014, 10:57 AM
hi
I would if I were you made ​​off with immo emulator! because it has air conditioning
regards

autoecu
31st March, 2014, 11:49 AM
Renault Clio 1,4 S110030304C 7700115097 IMMO KAPALI

joe1953
31st March, 2014, 01:37 PM
Hello,

i dont have emulator. @autoecu, will the solution work without emulator too???
Does i have to cut pin 58?

autoecu
31st March, 2014, 01:54 PM
.................ok.............pim58

skens
31st March, 2014, 02:15 PM
hi
yes must cut pin 58!
regards

joe1953
31st March, 2014, 02:20 PM
ok friend, why you said to biginning you would use emulator, when the second solution from "autoecu" works without emulator. This is what i dont understand....

skens
31st March, 2014, 02:37 PM
hi
can no emulators! the problem is a / c!
the car in your workshop, tried to several sw!
immo off the emulator is 100% with A / C
regards

joe1953
31st March, 2014, 02:47 PM
friend, i dont realy understand what you want tell me.
Will the air condition not work when i dont use emulator but car start then or what you are tying to tell me?

I just need car start air condition is not important.

skens
31st March, 2014, 03:01 PM
hi
Your dump is immo off, programming it and cut pin 58
regards

joe1953
31st March, 2014, 04:24 PM
so i have programm it and put it back to ecu. First customer was happy then angry. Car doesnt accept gas good and car move little if you dont drive. So engine is not normal. Why??

autoecu
31st March, 2014, 08:12 PM
.............will be tomorrow................

autoecu
31st March, 2014, 08:13 PM
................will be tomorrow...

autoecu
31st March, 2014, 08:17 PM
ilginen your problems will be tomorrow will be ok

joe1953
31st March, 2014, 08:21 PM
ok please dont forget me tomorrow, this man makes me crazy.....spend 6 hours with him

autoecu
31st March, 2014, 08:57 PM
the fact that people are rushing too much boring electronics is not a simple task

autoecu
31st March, 2014, 08:58 PM
Leave your own're doing

skens
1st April, 2014, 10:17 AM
hi
I guess you put the second of immo dump! always clean old!

each dump for engine type!
post the original dump

regards

ciptel07
1st April, 2014, 06:38 PM
take this tested solutions many time and work for me. The dump from first is not ori 100%

joe1953
3rd April, 2014, 02:13 PM
Hello,

i have programm from Line 4000 to 7FF0 , Result is: Car start for 1 Second and then go off, then 2 or 3 Times dont start and then in 4ourth try start again for one second. I used the original file but a other ecu with the same partnumber exactly ther same. With file from autoecu it starts and drives but engine not normal.

joe1953
3rd April, 2014, 05:26 PM
THANK YOU VERY MUCH TO ALL BUT MANY TO ciptel07!
The Solution WORKS PERFECT!!!!