View Full Version : VW Golf GTI Med9.1 need pin from ECU
toniz
1st April, 2014, 02:55 PM
Hi Guys,
Please help with pin from ecu.
Dump attached
Regards
easternghost
1st April, 2014, 03:16 PM
your pin-51814
toniz
1st April, 2014, 03:33 PM
Does not accept.
haroutioun
1st April, 2014, 03:33 PM
Hi Guys,
Please help with pin from ecu.
Dump attached
Regards
Hello.
your correct pin = 46861.
audivwauto
1st April, 2014, 06:54 PM
remember use coding11 on vag not always security acsess
toniz
2nd April, 2014, 08:14 AM
Is not happening guys, - Invalid login
haroutioun
2nd April, 2014, 08:44 AM
Is not happening guys, - Invalid login
Hello.
1) no my friend is not invalid login, is true login. see how is valid in the photo.
2) try ignition on 30 minute and after try login 46861
3) what tool u r using to adapt?
Bllinda
2nd April, 2014, 09:15 AM
Try...
pin:49254
CS:A1 22 xx .. .
MAC:25 xx xx ..
toniz
2nd April, 2014, 12:19 PM
Dont know, something is wrong. Using vag-com, have done many GTi before.
This one does not accept any of the above logins. Error 35 - Invalid Key.
Can someone perhaps have a full read with known pin.
Engine AXX manual - 1k0907115R 0261S02471
Thanks for the effort.
haroutioun
2nd April, 2014, 12:51 PM
Dont know, something is wrong. Using vag-com, have done many GTi before.
This one does not accept any of the above logins. Error 35 - Invalid Key.
Can someone perhaps have a full read with known pin.
Engine AXX manual - 1k0907115R 0261S02471
Thanks for the effort.
Hello.
1) u want to adapt new used ecu? give us info what u r doing on this car,above your loaded dump from original ecu,or ....?,did u try put pin original in immobilizer aftar adaptation in Chanel 50 by using pin 46861?
toniz
2nd April, 2014, 01:08 PM
Dont have the original ECU, this is donor ECU.
Got pin for the car, but can not adapt ECU. Tried from 25-Immo channel 50 - after i put 46861 on top comes PIN?
Also from 01 - Engine can not accept.
tqnata83
2nd April, 2014, 01:34 PM
Immobilizer IV ECU Swapping - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_IV_ECU_Swapping)
haroutioun
2nd April, 2014, 02:12 PM
Hi,
1) how u read the ecu eeprom by soldering out or bdm?. if by soldering try recheck if soldering good the eeprom. because above i show u photo by VCDS it accept my given pin 46861,i tested your loaded dump by writing in ecu and it accept my pin, so the problem maybe your ecu system or your scan tool.
Bllinda
2nd April, 2014, 02:36 PM
Error 35 - Invalid Key.
Can someone perhaps have a full read with known pin.
Engine AXX manual - 1k0907115R 0261S02471
Thanks for the effort.
How will I be at home to check with a calculator ...
Bllinda
3rd April, 2014, 12:01 AM
Try...
pin:49254
CS:A1 22 xx .. .
MAC:25 xx xx ..
CS pin code and correct. The MAC: xx xx .. 25
toniz
3rd April, 2014, 09:41 AM
I guess the ECU is faulty, i loaded dump with known pin and still refusing.
Otherwise it appears fully functional.
Anyone with full read or immo off files?
Thanks
haroutioun
3rd April, 2014, 10:48 AM
I guess the ECU is faulty, i loaded dump with known pin and still refusing.
Otherwise it appears fully functional.
Anyone with full read or immo off files?
Thanks
Hi,
1) if your ecu faulty & u try load another dump and still refuse,so how u thing if u write full bdm data in this ecu,so u think it come functionary???.
2) otherwise i search in my files i don't get full bdm for your ecu.about immo off not always done, because some encrypted files don't done immo off. u must try.or get another new used ecu.
toniz
5th April, 2014, 09:50 AM
It's done. Got a full with known pin. All good.
Thanks everybody for the input.
trevormaharaj
14th October, 2016, 04:16 PM
hi need pin cs and mac eprom 95160 med9.1 encrypted thanks for help
haroutioun
14th October, 2016, 04:40 PM
hi need pin cs and mac eprom 95160 med9.1 encrypted thanks for help
Hello.
the pin + cs + mac all this data you can found by obd2, not by eeprom dump.
Cloner78
7th May, 2017, 07:23 PM
hi. can you help me with my new ecu med9.1 , need pin mac cs. thx
kiszka
7th May, 2017, 07:41 PM
................
gmstonerprob
7th May, 2017, 08:37 PM
solution !!!
armanman
7th May, 2017, 08:40 PM
I tested immo off for this ecu, any one interested ?
Medions
8th May, 2017, 08:49 AM
to decrypt need eeprom+Flash+MPC
Cloner78
8th May, 2017, 08:57 AM
MPC Flash eeprom
Medions
8th May, 2017, 02:22 PM
I think this is dump from NEW ECU
Cloner78
8th May, 2017, 02:40 PM
Yes it is....
Cloner78
8th May, 2017, 02:54 PM
I tested immo off for this ecu, any one interested ?
It's for me ?
Medions
8th May, 2017, 04:28 PM
yes
VIN-XXXXXXXXXXXXXXXXX
Immo ID - XXXXXXXXXXXXXX
CS - 00000000000000
MAC - D50E0000
PIN - 65535
armanman
8th May, 2017, 09:40 PM
yes..........448592
Cloner78
9th May, 2017, 11:05 AM
armanman has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
I compared 2 files. you file contains duplicate data, but I try to use it.
Cloner78
9th May, 2017, 03:48 PM
http://www.digital-kaos.co.uk/forums/showthread.php/594906-need-MAC-PIN-CS-touareg-4-2-med9-1-1-for-replace-ECU
go to
armanman
10th May, 2017, 12:40 PM
did you solve it?
Cloner78
10th May, 2017, 05:44 PM
Yeeees. One person added key data from old dumps to new ones, I do not know how he does it. In the new engine, I downloaded the old PCM and the corrected EEPROM
449069
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.