PDA

View Full Version : Honda Accord EDC17 DPF OFF - checking



waldi1979
4th April, 2014, 10:59 AM
Hi,

Please DPF off.


Tnx

StepOn Chiptuning
4th April, 2014, 01:07 PM
253936


DPF off

waldi1979
4th April, 2014, 01:27 PM
Thank you very much.
You helped me many times.

waldi1979
6th April, 2014, 07:13 PM
DPF off works well but I have another problem.
I wanted to make more power.
If I touch any map (DW, NM-IQ, Turbo or Injection Time) after few kilometres (various 2, 5, 10) I have P061B error, check engine lamp and car has only idle speed. When I turn it down and run again everything is ok for a few kilometres. When I write original file (+dpf off) the car works properly

P061B - Internal Control Module Torque Calculation Performance

StepOn Chiptuning
6th April, 2014, 07:17 PM
DPF off works well but I have another problem.
I wanted to make more power.
If I touch any map (DW, NM-IQ, Turbo or Injection Time) after few kilometres (various 2, 5, 10) I have P061B error, check engine lapm and car has only iddle speed. When I turn it down and run again everything is ok for a few kilometres. When I write original file (+dpf off) the works properly

P061B - Internal Control Module Torque Calculation Performance



Yes torque monitoring error have on that car. For tuning on that ecu you need to be more precision moving

Sent from my SM-N9005 using Tapatalk

tunertool
7th April, 2014, 12:12 AM
Its a bad tune. Torque monitoring ecu. You cant touch certain maps on this one.

fronzethenight
23rd July, 2015, 03:21 PM
Hi, i had same thing... i programm and after 30km and various types of driving light comes.

anyone have some tips in tuning this car...

thanks

fronzethenight
23rd July, 2015, 07:23 PM
Hi, anyone have a good tested file?
Thanks very much.


no addys m8 !!!

fronzethenight
24th July, 2015, 09:41 AM
of course paying...

thanks