PDA

View Full Version : Orientation of EEPROM 93C56A in Toyota Yaris immo box



Belloriccoefamoso
4th April, 2014, 06:18 PM
Yes!
Yes!
Yes!
I'm a perfect idiot...
i told myself : for sure i will never forgt orientation of eeprom...
just after 20 seconds i forget it.... my memory is in trash.....
can you help me?
Toyota Yaris254014254015
EEPROM 93C56A
in photo i can see box and place where i desolded it
thank you

TPS
4th April, 2014, 06:28 PM
here you are

simaservis1108
4th April, 2014, 07:21 PM
Ok next time,one advice,find ground on car,find ground pin on immobox,then find ground on chip legs,when you find ground that is eeprom's 5th leg.No more hassle about orientation,except for rotated pins,then you check datasheet,and find ground also.

WBR,
Sima

Belloriccoefamoso
4th April, 2014, 08:47 PM
Many many thanks to you both. Unfortunately i m not so expert in electronic but i will find a way to discover negative ............

bangreno
4th April, 2014, 09:33 PM
here you are
Right.I worked with the same immobox. Pin 1 is the left botom in your pict.
ground trick is the easiest way. Take care about rotated pins mainly in car radio.

bearheroes
4th April, 2014, 09:49 PM
just find any other ic on pcb,find its pinout from datasheet in the internet and then with a multimeter check which pin is linked with the "known" gnd/Vss pin.

Belloriccoefamoso
5th April, 2014, 08:48 AM
yes right thank you!!!!