View Full Version : Range Rover Sport 2.7 V6 2006 ATM mileage
gbratk
7th April, 2014, 09:40 AM
Hi,
Can someone please tell me how to change mileage in ATM (all terrain module).
For dash and BCM are instructions in tachosoft, but for ATM I can't find anything.
There should be some script for UPA, but I can't find it anywhere.
Any help will be appreciated.
Thank you
Safety
7th April, 2014, 12:32 PM
upload dump here
gbratk
7th April, 2014, 03:09 PM
I don't have dump yet.
The thing is, that I'll have car only for few hours, so I have to prepare myself to do all 3 modules at the same time.
gbratk
8th April, 2014, 07:23 AM
I'll get the car today.
I'll upload dump here, and I'll really appreciate if someone could help me.
Thank you
gbratk
8th April, 2014, 09:23 AM
I disassemble ATM module, but there is no 93c86 inside?
Help please!
Fec001
8th April, 2014, 10:32 AM
Marked eprom what you need. that must be 93c86 for sure. Unfortunatelly I can't recalculate it, maybe someone will help you!
gbratk
8th April, 2014, 11:12 AM
Here is read of 93c86
Can someone please change mileage to 158.000km
Thank you
gbratk
8th April, 2014, 11:17 AM
Thank you for that Fec001 (http://www.digital-kaos.co.uk/forums/members/152445-fec001/).
I read it, now I just hope, that someone could change me mileage.
djoko.k
8th April, 2014, 12:05 PM
Whats current value?
gbratk
8th April, 2014, 12:29 PM
Whats current value?
it was around 100km less then 205.000
Safety
8th April, 2014, 12:29 PM
here .
gbratk
8th April, 2014, 12:30 PM
Here are original reads from dash and BCM
Safety
9th April, 2014, 10:43 AM
here .
Rtronics
4th July, 2014, 01:36 AM
hi, where is the bcm located ? i cant find it ?
will4u69
4th July, 2014, 07:28 AM
Behind glovebox its got all the fuses on the front of it....
Sent from my GT-I9300 using Tapatalk 2
Rtronics
4th July, 2014, 07:44 AM
i changed dash 1 week ago, come back with error. reprogrammed dash with dump from 1 week ago and did bcm. put it back in car and i still get error. disconnected battery for 5 min still the same. plugged in snap on scanner getting a lot of errors of lost communication to cluster. cleared all codes, still the same. any recommendations ?
paulocallaghan
4th July, 2014, 07:51 AM
Happened to me few times , prob best to put a different dump on a fresh EEPROM and change it , there's no immo/chassis data in this model
tunertool
4th July, 2014, 10:25 AM
Leave car running and remove dash... use another dump then put dash back and drive a few miles.
Rtronics
4th July, 2014, 10:41 AM
anyone have another dump pls.
angelo44
24th March, 2015, 12:47 AM
I am looking to locate the ATM module.... and cant find it.... Can anyone offer any pointers? Is it inside the box with the round selector button? A pic would help.... Thanks!
PremierD
24th March, 2015, 01:14 AM
Yes mate .. that is where it is .. :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.