help to add key on l200 triton 2009/ where is the imobox/

[stalonerambo]

t300? sbb? zedbull+effi,/ tmpro?help pleasehow i add a key never worked on this car before, where is the imobox?what transponder?how i add the remote control?help please,

[iamfooser]

You will need a mvp pro or ad100 or even x100+ to add the remote control. Transponder need to be precoded first. Mitsubishi id 46.

[Rhysstrain]

GSCAN will work fine with immo code 3828 or 940F (depending on model).
You can precode a PC7936 to L200 and it should program in no problem.
Let us know how you go :)

[stalonerambo]

pre codec the transponder i think, it's possible by effi and zed bull, about add a key , is it possible by sbb or t300, or even zed bull ,eprom, work, ,, if possible what i need to read and where is the imobox, if possible by sbb , what i need to select on sbb , because sbb only shows mitsubishi until 2006 and texas, not id46if possible by t300 , what imo model i need to select, help guys, don't what to a mess because will be to expensive to fix, if it's happened, againg

[Rhysstrain]

You can definitely precode the chip on the zedbull, I have never been successful with the SBB.
I have only ever programmed Tritons via obd with either a GSCAN or MVP
sorry

[stalonerambo]

and thanks friends for all information, mvp classic /i friend of mine has one mvp classic 9.99 china version, and effi 175 modules, what imobox l200 2009 tritons diesel are fitted / imobox e13 / ///// //

[gwee]

24c02, effi will program the key :)

[stalonerambo]

i found out today, on sbb, usa menu , eclipse(can) 07-09, galant(can) 08-10, outlander (can) 07-09, lancer(can) 08-10, endeuvour (can)07-09 ,eclipse(can) 07-09,, all them id46, as triton has can systems, i though , i can test all them , the question is, anybody here , add keys by sbb, on these cars on the list, and correct if i am wrong, but all them above has the same systems, other thing, the pin code is the same for all mitsubishi , and can i clone the remote by cn900?or only the key:?other thing, the ecu from thise cars, is it possible imo off, or reset, , and chinese remote work ? where can i buy a good one, thanks all friends, who is helping me,

[gwee]

To program key and remote for this vehicle, u will need MUT3.

CN900 no remote cloning lol

[iamfooser]

Chinese remote work. But to program it, you will need a programmer to do it. No manual method.