Aygo lost all keys

[theodor229]

Anybody help to insert my key data in the dump
Pg1= 53
Pg2= 47
Pg3= 4AA06313

Type 4D 67 read with zed
254661

[tmkz]

Key1: PG1:33
Key2: PG1:53

transponder 4D-ID70! no 4D-ID67!

[bearheroes]

33 53 B3 are ID70
32 52 B2 are ID67

[victor2k]

Hello,
Please add new keys to the dump of 89780-0h020 with all keys lost
Key1:7e b3 87 15 79 e4 ae 06
Thank you.

[TeL200]

I don't understand your data... give format as below from DST 70

Pg1= X3
Pg2= ??
Pg3= ?? ?? ?? / ??

[victor2k]

Hello,
Please add
Pg1:B3
Pg2:87
Pg3:1579E4AE
Thank you.

[TeL200]

Key added to position 3

[bram380]

Hello,
Please add new keys to the dump of 89780-0h020 with all keys lost
Key1:7e b3 87 15 79 e4 ae 06
Thank you.

Key pg1. B3 won't work to this cars.
Use key pg1. 33, 53 or 93

[TeL200]

Key pg1. B3 won't work to this cars.
Use key pg1. 33, 53 or 93
Can we wait Victor2K to report.

I added 2 x B3 keys for another member here http://www.digital-kaos.co.uk/forums/f178/aygo-2012-lost-keys-305226/#post2291065

The vehicle starts on both keys :joyous:

[victor2k]

Hello,
I will try and report if work or not.
Thank you.

[victor2k]

Hello,
Tested today on Aygo /2007/KR and work B3 & 33 pg.1 transponders
Original was 33 and added with success B3.

[TeL200]

Good report Victor, hit the Thanks button...

Now Mr Bram knows B3 work 100%

[gwee]

Bram is not wrong, theoretically B3 will not work, but again there is no logic in Toyota lol

In Asia we have not seen such models.

[TeL200]

Thanks Tyrone.

So Asia is different

In Europe Aygo use DST 70 Pg1. 33, 53 or B3

[yssf]

Hello,
Tested today on Aygo /2007/KR and work B3 & 33 pg.1 transponders
Original was 33 and added with success B3.

"Original was 33 and added with success B3" what do u mean? does it mean that you don't use TEL200's dump with checksum changed for b3,and you manually add B3 instead of 33 without change checksum.right?

Cause you don't directly replied on TEL200's dump.
Please reply we're still all learning.




Sent from my iPhone using Tapatalk

[keygargoil]

b3 is a master but cannot be added in the first 2 positions for aygo and avensis auris etc key1 needs a 33 key 2 needs a 53 a b3 is always supplied from the dealers as this is for programming as a spare by diagnostics and not for lost keys when toyota do a lost key they replace the immo box which comes with 2 new keys a 33 and 53 master

[victor2k]

Hello,
Don't tested yet the TEL200's dump.Immo ECU is taken from a car what was total loss.Transponder is taken from other car.I need now the Engine ECU to make the test on the table.Techstream need Engine ECU to make connection with the car,other scanner don't show the full info related to the immo.Don't know until now if the changed checksum is ok or not.
On a working car/Aygo/2007/KGB(with transponder pg1:33 ) I added a new transponder (with pg1:B3) to verify the Bram380's info(post no.8) as a 3th master key .Car star with both keys,in diag I can see the new key registered...

[bram380]

Congratulations, you've worked hard and did well.
As well as providing news to all members about what you've done.

[yssf]

any time you have chance to try tel200's dump please post report.:joyous:

i had also add b2 of id67 on lexus gx300 on all keys lost situation,the car start but the security light still blinking.
anyway thanks for the info

[victor2k]

Hello,
According to the attached TSB old keys(with pg.1 :33 or 53) and the door locks are replaced by a new keys(with pg 1:b3) and door locks,so the Immo ECU must learn new keys(with new transponders) instead of the old keys-what are keeped by the dealer and must be erased from IMMO ECU .
Thank you.
b3 is a master but cannot be added in the first 2 positions for aygo and avensis auris etc key1 needs a 33 key 2 needs a 53 a b3 is always supplied from the dealers as this is for programming as a spare by diagnostics and not for lost keys when toyota do a lost key they replace the immo box which comes with 2 new keys a 33 and 53 master

[victor2k]

Hello,
I made a complete set:transponder/coil/IMMO ECU/Engine ECU on the table and I tested the dump.
I am sorry to tell you but Immo is still SET/only 2 keys recorded by IMMO ECU.
I tested with the sended dump and with a modified dump(with transponder pg.1:33)
IMMO ECU &Engine ECU is sync(was taked from car with all keys lost).
Solved :virginized IMMO dump and learned first key(IMMO is UNSET,transponder is recognized as master(even if pg1 is b3,only location in dump will be after xx10).
QUOTE=TeL200;2292607]Can we wait Victor2K to report.

I added 2 x B3 keys for another member here http://www.digital-kaos.co.uk/forums/f178/aygo-2012-lost-keys-305226/#post2291065

The vehicle starts on both keys :joyous:[/QUOTE]

[RFRemotes]

Hello, I have a question please.
When you add some old aygo key to immo memory this way, will the remote control work?
I mean keys as in picture. Thanks.

[cjawahir]

B3 will also work because its id 70 too and also 93 , but 93 will only work in valet position .

cj

[gwee]

Hello, I have a question please.
When you add some old aygo key to immo memory this way, will the remote control work?
I mean keys as in picture. Thanks.

remote will not work, need to program manually or via techstream

[Carkeysa]

Hi, can anyone please add tie following key to the attached dump? Thanks in advance

Pg1 33
Pg2 32
Pg3 88B79B12

[gwee]

Hi, can anyone please add tie following key to the attached dump? Thanks in advance

Pg1 33
Pg2 32
Pg3 88B79B12

key added :)

[Carkeysa]

Vehicle started, your help greatly appreciated!



key added :)

[gwee]

your feedback also highly appreciated :)