PDA

View Full Version : EGR off



diyre
9th April, 2014, 08:45 PM
Hello, I'll be right here with a question for something rare. I wanted to cancel the EGR a picaso 2.0 HDI
EDC15 c2, I found two maps, 61F12 and 71F12. I leave all values ​​equal to 1100.0. but
once loaded the map, I get engine breakdown, EGR circuit, lower air flow
adjustment.
I can not find any other map, I've had something like a C3 1.4 HDI impossible to leave.
Someone happened something?
regards
thanks254906

NASTASE
10th April, 2014, 06:40 AM
Hello, I'll be right here with a question for something rare. I wanted to cancel the EGR a picaso 2.0 HDI
EDC15 c2, I found two maps, 61F12 and 71F12. I leave all values ​​equal to 1100.0. but
once loaded the map, I get engine breakdown, EGR circuit, lower air flow
adjustment.
I can not find any other map, I've had something like a C3 1.4 HDI impossible to leave.
Someone happened something?
regards
thanks254906
Hi m8,
For this ECU , there is a switch for EGR.
Check address 6111D and 7111D,look in 8 bit decimal, and change value 001 to 000.That is EGR off(not EGR remove)
Don't forget the checksum.

diyre
10th April, 2014, 02:49 PM
Hi, thanks for your reply, according look map, that direction a possible WinOLS map, this would change according to the direction and the 01-00. In the map, change 256 for 00, in complet map hex 01-00.
It seems to be something about swith method or something. Information or programs know this system, according hear is more effective to make the map flat. It's like a kind of ON-Off in egr which also can be used to DPF.
I attached the map that I get the address and change the map.
regards
thanks254990254991

bobolin4o
10th April, 2014, 04:16 PM
It's more effective to make the EGR map flat... if you want to have limp mode non-stop...
Do this, that NASTASE said.
Cheers!

morgano
10th April, 2014, 06:01 PM
It's more effective to make the EGR map flat... if you want to have limp mode non-stop...
Do this, that NASTASE said.
Cheers!

Lol

Yes true!!!


Regards,

diyre
10th April, 2014, 06:09 PM
Yes, that's what I did and I put in the pictures as it is so correct. But as each model is the location where that little interuptor to activate it?
There is some information about this topic?, in the download area saw some recent egr program, but I ami not work.
regards