CLEAR FILE FOR 6Q0909605AE INDEX 10

[panos1975]

I am looking for a working clear file for this ecu.I am trying to clear it with ecuvonix but the file has cks error.If anyone could help i'd really appreciate it.Thanks i progress.

[rocodou]

here good luck

[panos1975]

Thanks a lot

[panos1975]

I tried 20 different clear files with no luck.Every time same error (65535 internal cks error).Is there any solution for this or only replacement due to hardware problem?

[tomlib]

Mayby hardware problem...
Write a certain dump from a similar sensor. If the error persists is a hardware failure. What kind of equipment check dtc? Read/write dump by obd?

[panos1975]

I have the same eror even with an original dump with the same hw ecu number an same index.Check dtc's with vas 5052a and read write dump files with batronix programmer.

[Dian H]

Try this and post results

pass in p.m.

Regards

255923

[panos1975]

Thanks imo i'll try it and i'll tell you the result.

[panos1975]

Thanks for your help but it doesn't work.Same result: 65535.The strange is even i write back crashed data in the eeprom i have 65535 dtc and vas 5052 doesn't appear ecu hw number and coding on the screen.I don't know what is going wrong.If anyone knows a good working solution for vag airbag ecu's(i mean a software that really works or manual crash data erasing )pease report.I have tried some softwares(ecuvonix,cartool,airbag tool)with no luck.Thanks in progress.

[PierreTheron]

Hi try clear by obd2 with carprog m8

[panos1975]

Thanks imo but i haven't carprog.Who knows where can i buy a good working carprog clone because he original is too expensive...

[Zeittt]

Hi. Check that fixed.....

BR

[panos1975]

Hi again.Does anybody knows the adresses area in the eeprom that are stored the crash dtc's?Every clear file i have seen is corrected from 0x000A-0x0031 and 0x024C-0x024D.What data is stored in the first area and what in the second?If anyone knows and would like to share info's a please

[panos1975]

All clear files i tried give me 65535 dtc.Idon't know what is going wrong.The 65535 dtc appeared after the first clear file i tried and from then every clear file i try, give me the same result:65535.Also after the first clear file i trid my ecu lost it's coding and doesn't appears ecu hw number im my vas 5052.Could anybody please explain me what i am doing wrong?Thanks in progress.