OPCOM problem

[lkjubaking]

I have problem with my OPCOM clon

Number of interfaces: 1
Description: OP-COM USB V2
FTDI USB Serial: FTUB2223
FTDI-ChipID ChipID: 0xA4C5A7D5
FTDI-ChipID Location ID: 0x41
O***M Serial-Number (calculated): 4GKMQ9VU
O***M FW UPdate Code (calculated): 5PB18YCV
Interface opened. Handle: 90770240
Baudrate 500kBit/s
Dataformat 8N1
Flowcontrol NONE
SetChars
Timeout 5 seconds
Set DTR and RTS Low = PIC Reset
DTR low
RTS low
Wait 1 second for reset
Set RTS High = PIC running
RTS high
Wait 1.5 second, so bootloader can start FW...
RX Buffer clear... OK
FW Versions- and Interface ID- request send.
Timeout - is your PIC empty? No Firmware?
*** Firmware Version: 7F.0
**
*
Set RTS to LOW = PIC Reset
RTS low
Communication closed. Handle: 90770240


Is there a possibility of repair?
Thanks

[lkjubaking]

SOLVED
Thanks