View Full Version : Saab 9-3 All Keys Lost
DiagExpert
16th April, 2014, 09:38 PM
Hello DK i have a Saab 9-3 with all keys lost i know that i can't program a new key unless i have a good working key,the options that i have is to write CIM with a virgin dump and program a new key if this is the correct procedure anyone can correct me.
Regards.
keygargoil
17th April, 2014, 12:26 AM
i would not even try thsat route going down the virgin path just add a new remote key to the dump and it will be ok tm pro tango etc
Bllinda
17th April, 2014, 02:04 AM
i would not even try thsat route going down the virgin path just add a new remote key to the dump and it will be ok tm pro tango etcWhich of the following Programmers can unlock the old key phi / cr / lck? Thx
Is there anything it can do?
DiagExpert
17th April, 2014, 06:12 AM
the only tools i have a programmer for 93LC66A eeprom and TECH 2
Regards.
Sent from my GT-I9300 using Tapatalk
DiagExpert
17th April, 2014, 07:49 AM
This is the procedure from Saab WIS.
Bllinda
17th April, 2014, 08:13 AM
i would not even try thsat route going down the virgin path just add a new remote key to the dump and it will be ok tm pro tango etc
You tried to_access_a_key_(old-who was on the other machine) tethered to the_CIM?
DiagExpert
17th April, 2014, 08:37 AM
What do you mean?
Bllinda
17th April, 2014, 09:46 AM
I realized that you do not have_techx
DiagExpert
17th April, 2014, 09:46 AM
you mean Tech 2 i have it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.