Working picture!....Then Freeze

[efguk]

Running CableFerret.

all EMU's, show picture (and sound) on (example Sky Movies comedy) for 15 seconds then the picture and audio freeze and even FTA channels are frozen.

Any clues?

I had Channels working perfectly on Fatman, but it only found 50 channels. I might try it again and make sure It selects my location correctly.

Any help or ideas welcomed!

[plasterer]

Possibly be helped by the Booster below ....Paul
plasterer (http://www.argos.co.uk/webapp/wcs/stores/servlet/Search?storeId=10001&catalogId=1500001001&langId=-1&searchTerms=5344235&x=26&y=7)

[Barnsley Bill]

Take your bouquets xml and service xml,off the cable ferret image....flash ,fatman,,then ftp the bouquets and services over to the fatman image..no scanning needed.

[efguk]

Take your bouquets xml and service xml,off the cable ferret image....flash ,fatman,,then ftp the bouquets and services over to the fatman image..no scanning needed.

I just decided to do this before reading your post, it's a good plan, I hope it works.

[bridgem]

what box are you using sagem or nokia 1 or 2 #

[blahdragon]

I have found that it is a signal problem that can be caused by loose connections in the tuner, this can be fixed by replacing the tuner module or soldering and tightening the internal tuner connection.

Hope this helps, I had a simillar problem and fixed it by tinkering with the tuner

[Dreamer]

I have come accross this problem a couple of times. once was because I needed to update the image and the othertime it was because the cable connection coming out of the tuner was becoming loose and needed resoldered to stabilise it but this problem can also be caused by a weak signal I believe.

[efguk]

Good news everyone!

Took bouquets and services from cableferret, stuck em into fatman.

All is working!

Thankyou all for the help.

[BRIN_1307]

If you want more channels that you dont find try BLADE QUAD from download section works great

[pete2vinal]

i hadthis problem after a while of viewing. think it could be the box though

[BRIN_1307]

i had the same problem but only with the cable ferret image. channel worked for bout 5 seconds then froze if u turn over then same thing again even on FTA channels.

[rickets]

Its not a dodgy r-m7 or r-m10 or r-m11 in the image is it ?

[BRIN_1307]

Try changing to EVONCAMD an changing UCODES from 0014 to 001A or the other way around

[charan]

If you want more channels that you dont find try BLADE QUAD from download section works great

blade quad is great because the scan only takes a few minutes wheras laky pro takes a good 20 minutes

[elfis280]

whats fatman, never heard of it, take it its a new image, i found blade quad set to gbox best so far for a sticky sagem but not perfect.

[plasterer]

Wot you never Heard of Fatman
You Got a Lot to Learn
Mans a D box Legend ...............paul