PDA

View Full Version : Suzuki Swift 1.0 Denso 33920-68E4 immo problem



atd
18th April, 2014, 05:46 PM
Hi to all!:joyous:
I have problem with immo, after battery dead.
I read ecu 93c56, immobox 93c66 and key (4c), everything in rar.
Could somebody check this files or help with syncro this?
Thanks in advance.

split78
19th April, 2014, 10:32 AM
Emul?tory (http://eshop.autoelectronic.cz/index.php?route=product/category&path=1)


best solution for you.

keygargoil
20th April, 2014, 12:39 AM
here try thid for your ecu file the immo is ok

atd
22nd April, 2014, 10:04 AM
Thank you for help. Unfortunatelly the car don't start. I tried many solutions, yours keygargoil was the last one and still doesn't start.... I don't know why, maybe something is wrong with ecu. After diagnosis still present immo fault...
I have another complete set of ecu+immobox+key with coil and this setup allows to start the car but ecu is different numbers and car has bad idle and doesn't accelerate.
Any idea or experience with this?
Thanks in advance.

okura
22nd April, 2014, 11:26 AM
256727

Pass, send me PM

atd
24th April, 2014, 04:44 PM
Car still doesn't start. I tried few files but without succes. I can pay for 100% working solution.

antlio
24th April, 2014, 05:09 PM
Hi

Try this and post results . This is im*o off solution . Disconnect first immo box . Pass is in your pm.

regards

okura
24th April, 2014, 05:53 PM
Check PM, will make new sychro for you

okura
24th April, 2014, 06:15 PM
Pass PM257020

zhvepes
24th April, 2014, 07:23 PM
Hello, please i have the same problem. Can you help?

BR

okura
24th April, 2014, 07:47 PM
read again in 16x memory

zhvepes
24th April, 2014, 08:00 PM
I can't read it anymore, because i've writed them a lot of times now, with diferent files. Any solution?

BR

okura
24th April, 2014, 08:30 PM
ecu dump is wrong, must read 16x

filutek
24th April, 2014, 10:27 PM
Tech2 suzuki soft synchronize everything with no problem.

atd
25th April, 2014, 02:32 PM
Car starts, everything work perfect! :) Thank you for help guys, especially thanks to okura :beer:
The second solution from okura works perfect, car starts. His first solution didn't work, same as solution from keygargoil and antlio but many thanks for interest. This ecu is really strange.

zhvepes
26th April, 2014, 12:08 PM
Can you send me correct dump for both immo and ecu so i can produce key with sbb?

BR

okura
30th April, 2014, 08:23 PM
test it and let me know 258042

zhvepes
1st May, 2014, 12:17 PM
I just tried but car doesn"t start. Immo led on dash blinks. Ca you check?

BR

cheaper
23rd June, 2014, 07:02 PM
Hello guys, I have same problem, but dumps looks good for first see. Anyone can help please?

ECU 33920-68E4
IMMO 33970-60G03

tmkz
25th June, 2014, 02:58 PM
try this file and report

cheaper
26th June, 2014, 12:07 PM
thanks, but not works

tmkz
26th June, 2014, 12:55 PM
try this,...

ChipDoctor
4th March, 2015, 04:50 PM
Pass PM257020
Hello my friend

Can you give me the pass please??
I have the same car ,ecu and the same problem and i will made one new key with tango

Send me the pass please
Thanks

utek
13th April, 2020, 05:08 PM
okura help please,,