PDA

View Full Version : P307 sid803a DPF off



Vint75
19th April, 2014, 09:25 AM
Hi, Help i need DPF off for peugeot 307
sid803a 5WS40277G-T
AM29BDD160GB

Thanks

best Regards

jolidj
19th April, 2014, 10:09 AM
hi. only manualy solution. some sw dont work with this ecu.
you try volta solution??

Vint75
19th April, 2014, 01:38 PM
volta didn't try, all write that volta not correctly works.

ecumix
19th April, 2014, 03:04 PM
Try this :)

Vint75
19th April, 2014, 11:48 PM
Try this :)

This solution not working

ecumix
20th April, 2014, 11:29 AM
try this time will be good

tunertool
20th April, 2014, 12:54 PM
Please post micro.

ecumix
20th April, 2014, 01:31 PM
what micro is not sid803

Vint75
21st April, 2014, 11:30 PM
try this time will be good

not working P0000
content of soot of 100%

tunertool
22nd April, 2014, 10:46 AM
Please see attached, pass pm

Vint75
22nd April, 2014, 12:29 PM
send the password please. in personal messages it is empty.

Vint75
22nd April, 2014, 03:01 PM
Please see attached, pass pm

not working P0000, P1434
content of soot of 100%

tunertool
22nd April, 2014, 06:02 PM
File works perfect, do a dpf reset before writing mod file.

This is tried and tested solution ive made many cars :)

Vint75
22nd April, 2014, 06:30 PM
why then shows 100% of soot and an error of P0000?

kennfeld
24th April, 2014, 08:02 PM
why then shows 100% of soot and an error of P0000?


because you need to reset soot and km since last regeneration before to apply the file

Vint75
25th April, 2014, 11:19 PM
in BSI it is necessary to leave everything as is, or it is necessary to switch off DPF and a fuel additive?

Vint75
29th April, 2014, 11:44 PM
in total dump which to me distances don't work. maybe who has a checked decision?

WinWoj
19th January, 2015, 08:07 AM
Hi, I have the same problem after such mod - mean someone make mod and P1434, P1435 and P0000 present. So my question is : can I switch off dpf via lexia/proxia tool? Or should I make ori 1st, reset dpf via diag tool then programming mod via bdm100 or ktag? tunnertool - could You send me pass on pm please? What about bsi? Should i do something in?
Regards

oem
20th January, 2015, 10:10 PM
I have best solution with remove sensors, no more rising the soots and regenerations. It is my manual work and it turning off only dpf related.

electronicservicemate
20th January, 2015, 10:14 PM
295719 HELLO USE THIS TESTED SOLUTION

electronicservicemate
20th January, 2015, 10:15 PM
WRITE BY GALETTO V54 BY OBD

WinWoj
21st January, 2015, 10:57 AM
WRITE BY GALETTO V54 BY OBD
Thank You m8 very much. I'll use Your solution. But - I havn't galletto yet. My MPPS can write, but for readout I must use KTAG clone. Or BDM100 - I don't know what is more safety, I don't use it before, I going to test both first in another two sid's - sid 801a from betlingo and sid 301 from megane. Then decide to use for customer's sid803a from P307'. Please confirm steps:
1. Reset DPF via KTS (or Lexia)
2. Read sid803a via KTAGclone (or BDM100)
3. WriteYour "dpfoff11 (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295719&d=1421788462)" solution via KTAG (or MPPS)

WinWoj
22nd January, 2015, 09:42 AM
295719 HELLO USE THIS TESTED SOLUTIONHi file size is 448kb. It isn't flash so I can't write MPPSv16. This is my only tool...

WinWoj
22nd January, 2015, 03:16 PM
Nobody can help me? In MPPS v16 is ability to write, so I'd like to use this tool to reflash to delete P1435 and P1434 fails also P000 sometimes. Dump from car was modified to dpfoff, bud additive system still flooding this two fails, when I plug and unplug additive module... What to do??

oem
23rd January, 2015, 09:16 AM
DPF is not correctly off.

WinWoj
23rd January, 2015, 11:34 AM
DPF is not correctly off.

Yes, I know that. So How can I make good mod, using MPCxxx dump given me earlier, when I have only MPPS (i think is useless for this kind of ecu) and BDM100? BDM100 do this properly (in ecu list present sid803a).
PS: KTS550 can't reset soot in P307. Only lexia? Because my dont want to working :(

oem
23rd January, 2015, 03:39 PM
where is your dump?

WinWoj
24th January, 2015, 10:44 AM
where is your dump?

My KTag clone death, I wasn't sure I can use BDM100 for it, so I didn't read ecu. Now I havn't car so want to read sid801 and sid301 to test I have, but I cant find info how...