PDA

View Full Version : diagram dpf emulator



plays
19th April, 2014, 10:27 AM
hello to all,
I was looking for a diagram to emulate a dpf fiat doblo 1.3 mjet, which of course would vary its value based on the rail pressure or at maf. can anyone help me in this adventure, I found some patterns that I attach but I can not understand



256392256393

mexanico1971
19th April, 2014, 01:10 PM
Hi great !
can you be more especific about what you don understand ?!
signal on top left is ("IN"sginal) I think !
the one rigth down is to ecu signal maybe !

Br

plays
19th April, 2014, 03:29 PM
where do I put the signal for the rail pressure sensor (so that the differential pressure sensor varies according to what)??

mexanico1971
20th April, 2014, 12:26 AM
are you shore is for RAiL ?! I think is for MAF !
any that have technicians knowledge about sheme please give some help !

thank"s in advance

BR

plays
20th April, 2014, 10:46 AM
Where i connect the signal of maf? And where connect the sensor pressure differential? Thanks a lot

smayer
22nd April, 2014, 12:38 AM
With this emulator you solve the differential pressure problem, and about soot contamination ? Why use emulator if have easy solution to Dpf off in Ecu ?

plays
22nd April, 2014, 08:20 AM
With this emulator you solve the differential pressure problem, and about soot contamination ? Why use emulator if have easy solution to Dpf off in Ecu ?
you're right but I do not have all the equipment to dpf off in the ECU.
can you help me??

smayer
22nd April, 2014, 11:46 PM
you're right but I do not have all the equipment to dpf off in the ECU.
can you help me??
If you can read and write file in ecu then yes i can help.

plays
28th April, 2014, 05:01 PM
If you can read and write file in ecu then yes i can help.

hello
I am plays from italy,
You said that you can help me in this venture?
that instrumentation and software do I need?
I possess cantiecar full edition
something that I would block anything and which have fewer problems with possible
thank a lot

velindro
28th April, 2014, 07:30 PM
hello!for read and write,you can use galleto 1260,for dpf off the ecu map,you will need,VOLTA or ECUSAFE

einet
25th May, 2014, 04:41 PM
are you dreeeming?

plays
25th May, 2014, 09:08 PM
Why i am dreemig??????

Youneselm
25th May, 2014, 09:47 PM
Best solution is manual mod in flash. Volta and EcuSafe is CRAP!!!!


Younes the tuning specialist;-)