PDA

View Full Version : HYundai tucson DPF (CPF) remove



agabna
23rd April, 2014, 10:36 PM
hello
pls i need to remove the PDF (CPF) from ecu bosch edc16+c34

thanks for help

atomiczen
23rd April, 2014, 10:39 PM
your dump is not good, how you read it?
tucson 2.0 crd is edc16c39

agabna
23rd April, 2014, 10:56 PM
hello
i had used bdm100 (CMD)
and i am sure it truse
but if more instruction how to read it ll be good

thanks

ominimicu
23rd April, 2014, 11:54 PM
looks like a ALl data enconded file. can u read falsh separately?

agabna
24th April, 2014, 02:09 PM
hello
i ll remove the eeprom and try to read the mcu

thanks for help

agabna
27th April, 2014, 10:02 AM
hello

i had read it again
pls can you check it again

thanks for help

ominimicu
27th April, 2014, 10:14 AM
Yes , Perfect read now!

atomiczen
27th April, 2014, 03:18 PM
Here your tested working file
please report and thanks

pass pm

agabna
27th April, 2014, 04:42 PM
hello
pls can you upload the file again
thanks

atomiczen
27th April, 2014, 05:35 PM
hello
pls can you upload the file again
thanks
file is correct, forum have some problem in these days
download and rar work ok

agabna
27th April, 2014, 06:35 PM
hello
at the end the file had opened

i ll test it in monday and i ll report
but i am sure it ll work
it is from the best

thanks for help

agabna
29th April, 2014, 08:53 AM
file is correct, forum have some problem in these days
download and rar work ok

hello
their is no code for cpf now
but the check lamp is blinking and i have fault p0472 exhaust pressuer sensoer voltage low
and i had changed the sensoer with other one
any kind of help please

thanks

atomiczen
30th April, 2014, 01:01 PM
hello
their is no code for cpf now
but the check lamp is blinking and i have fault p0472 exhaust pressuer sensoer voltage low
and i had changed the sensoer with other one
any kind of help please

thanks
try to unplug sensor, or you have to remove dtc from flash

agabna
30th April, 2014, 02:19 PM
hello
thanks first
when i unplog the sensor the check lamp is on with fault circuit high
i also had join the input hose to make the preesuer equle in the sensor
when i erase the fault it ok for just 3 km and then the same problem with lime mode

i dont know how to remove the dtc from the flash

thanks

atomiczen
30th April, 2014, 08:38 PM
here your dpf and dtc file
test and report
same password

agabna
9th May, 2014, 05:16 PM
hello
i didnt report because the car is still in the grage it need new turbo and 2 injectors and i am waitting for them

thanks when it ready i ll report

thanks for hellp

agabna
20th May, 2014, 02:27 PM
hello

the car today in the road for test

i ll test and report

thanks

carsinlet
3rd June, 2014, 04:55 PM
Hi i have a tucson CRTD CDX 2.0. I i removed the pdf\cpf.from the exhust as it was blocked the sump was full of diesel had a injector leaking bad runing on 3 cylinders had injectors replaced and new oil engine runs good but check lamp on cpf/dpf fault after a few miles engine in limp mode 2500rpm max, tryed ecu safe 2. engine ckeck light now not swiching on but still going into limp mode can someone please remove dpf/cpf from orig file please read with fg galletto thanks.

pinotec
3rd June, 2014, 05:55 PM
if you want to try my file ,but not tested on car

carsinlet
4th June, 2014, 09:13 AM
Hi pinotec cannot open file to try need password to open file. thanks,

carsinlet
5th June, 2014, 01:43 PM
Hi sorry but now have a problem opening winrar file diagnostic massage unexpected end of archive. i can down load file and use winrar to open file enter pass word and this diagnostic massage shows and can not open file.