Kenwood DNX7260BT wherein the code eprom

[seba_m_]

Hi friends, help someone locate what eprom is the code for this radio? Radio is a Kenwood DNX7260BT. maybe there is a possibility to obtain the code by serial number?

for all the tips thank you very much

[manasrah]

hi i thing the eeprom is 24c08 Beside the nec

[mobilart]

Code in flash TS58

[seba_m_]

Thanks buddy manasrah, I found at the same time as you gave me a hint, eeprom is the first mainboard right under the dvd drive. Buddy mobilart are you sure that the code is in flash? eprom have someone solder likely to read the code.

[seba_m_]

It will help someone with the boys read the code?

[bogege]

I do not see this code, you have to believe mobilart!!

[seba_m_]

and you guys picture where the flash?

[mobilart]

Why do you need this flash ..?
solved the problem with the code is much easier ..
I understand that the decision you pay no interest,
Then just think a little ..

[seba_m_]

Friend Mobilart you solution to my problem or not? From what I have read write flash, you may have another way to get the code for this radio? If you have to pay.

[seba_m_]

It will help anyone?

[bogege]

I'm not sure, but maybe mobilart idea to read user Manuel and see if you can decide from there!??http://www.caradio-manual.com/kenwood-dnx7260bt.html

[seba_m_]

I solved the problem, enter the service mode key combination reveals all the data together with a PIN code to the station.

[Bodziu65]

How enter the service mode ?

[Dragan78]

Hold down SRCN and EJECT buttons. This will shut the unit off. While holding SRCN + EJECT, use a pen or some other small, blunt device to press the RED TRIANGLE (reset) button.
Release the RESET button. Continue to hold SRCN + EJECT until the interface buttons illuminate.