I need help to adapt a new injection pump on Audi Allroad 2.5 v6 diesel.

[electrones]

Hi friends

I have Audi allroad 2.5 v6 diesel 2005, doesn?t work because this:

Address 01: Engine Labels: 059-907-401-AKE.clb
Control Module Part Number: 8E0 907 401 J
Component and/or Version: 2.5l/4VTEDC G000AG 0006
Software Coding: 06006
Work Shop Code: WSC 02334
Additional Info: WAUZZZ4B05N025985 AUZ7Z0E2713098
Additional Info: 00000059 130 106LC150_1.V79445145212
VCID: 2C5D1A69DC10169
2 Faults Found:


17978 - Engine Start Blocked by Immobilizer
P1570 - 35-00 -
01375 - Valves for Engine Mounting; Stage 1
38-10 - Output won't Switch or Short to Plus - Intermittent

I have try to do adaption according to Ross tech but without success Immobilizer III Injection Pump Swapping - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Injection_Pump_Swapping)
PIn is 08539
Can someone help please!!!

Thanks in advance

[synkrotronic]

It is a new pump or used from another engine?

[electrones]

Hi

According to the owner the pump is new, I found the pump already mounted.
The car came from another workshop.
THank

[synkrotronic]

See if help not tested

[electrones]

Thank you m8

I?ll report soon

Cheers

[electrones]

See if help not tested

I apologize my friend
I sent the file to another Audi Allroad, if you could help me with the modification appreciate.
I checked the file I saw that the code was not right pin and Vin numbers were different.
grateful


Cheers

[synkrotronic]

No problem,sorry only now see forum.
Same pass,you need to test it
Regards

[electrones]

No problem,sorry only now see forum.
Same pass,you need to test it
Regards

Thank m8, but doesn't worked

Cheers

[electrones]

Hi friends

Problem solved, thank you all for your help, finally managed to make the adjustment successfully

Cheers

[synkrotronic]

Good job mate,regards