View Full Version : AIRBAG TOOL
adam28
15th June, 2009, 04:19 PM
This is a very good crashdata removal tool
Only demo though
Regards
Adam
bosanci28
22nd June, 2009, 06:25 AM
will this remove data crush from airbags only?
thanks
adam28
22nd June, 2009, 12:00 PM
Yes mate only Airbag
bosanci28
22nd June, 2009, 05:14 PM
do you know any software that will remove data crush on the all system on bmw 2001 740i? (purchased the car damege and fixed the car)
i have a airbag light that i want to reset and im using carsoft 6.5 interface,,it connects ok,,but when i start the diagnose it can be only one or on all i get the error ""module does not respond" so must be something going on,,if none of the modules work...
thanks
adam28
22nd June, 2009, 06:00 PM
download this and take alook.Air4.rar]zSHARE - Air4.rar (http://www.zshare.net/download/59181376f10ea2f4/)
Run program with antivirus off or it will throw up a virus and not work. (Its harmless) then turn av back on.
Cheers
Adam
bosanci28
22nd June, 2009, 06:16 PM
thanks will give it a try,,
and what exactly this soft will do,,remove crash data on airbag or the all car...thanks
adam28
22nd June, 2009, 06:22 PM
it removes crashdata from the airbags ecu. by reprogramming the eeprom or mcu inside it.
bosanci28
22nd June, 2009, 06:33 PM
it removes crashdata from the airbags ecu. by reprogramming the eeprom or mcu inside it.
but,,will this go thru
because right now i cant go thru on any modules on the car with the carsoft interface!
adam28
22nd June, 2009, 06:51 PM
Should work mate. You need a eeprom programmer to use the software i gave you.
I hope you get it sorted. Keep me updated.
madmen
27th June, 2009, 09:45 AM
Should work mate. You need a eeprom programmer to use the software i gave you.
I hope you get it sorted. Keep me updated.
hi, please i need the programmer where i can find it??you have a website link to give me??
adam28
27th June, 2009, 10:09 AM
have a look at some programmers here to get a idea
XPROG-T HC12 / HC11 / HC08 / HC05 Programmer + 7 Adapters (http://www.techgsm.com/XPROGT_HC12_HC11_HC08_HC05_Programmer_7_Adapters,4 7434.html)
HandBreak
5th July, 2009, 06:13 PM
This is a very good crashdata removal tool
Only demo though
Regards
Adam
What kind of interface support this tool ? This tool to be working with k-line rs-232 adapter ?
adam28
5th July, 2009, 06:55 PM
have a look at some of these programmers to get an idea.
with this software you need to desolder eeprom or mcu and put in programmer and read and edit dump
XPROG-T HC12 / HC11 / HC08 / HC05 Programmer + 7 Adapters TechGSM.es - Desbloqueo de telefonos moviles, accesorios, herramientas de reparacion, Nokia, Motorola, Siemens (http://www.techgsm.es/XPROGT_HC12_HC11_HC08_HC05_Programmer_7_Adapters,4 7434.html)
ally123
25th August, 2009, 11:12 PM
hi guys do not know if this helps www.airbagreset.com (http://www.airbagreset.com) they wipe the crash data of the module and restore it back to its factory settings so all you have to do is just plug it back in.and it is 60 quid to get it done hope this helps.
angelovfv
16th July, 2011, 04:21 PM
This is a very good crashdata removal tool
Only demo though
Regards
Adam
it will reset ford fiesta 2004 also???
angelovfv
16th July, 2011, 04:23 PM
it will reset ford fiesta also?
martij976
17th July, 2011, 06:32 AM
This post is more than one year old m8... Try new post with precise info and dump attached! Someone over DK will try to help You!
brahimdiag
25th February, 2015, 01:22 PM
mi id is F4BF7FF8-27AB pliz give me the name with the pass word
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.