Siemens 96 314 932 5WK 4202. Trouble with verifying.

[rickyboy]

Hi, this is my first post so please go easy!

I bought carprog in the hope of fixing my girlfriend's airbag light on her matiz.

I believe I've managed to hook up the chip correctly according to the wiring diagram provided and can get the interface to read it but never manages to verify it. Could someone point me in the direction where I've gone wrong.

Here's the airbag dump. I'm not convinced this has read this properly at all but here it is, I'm sure someone will know if it looks correct or not...

257556

The other thing that's causing me quite a bit of confusion is the chip itself. According to the information online this module has a MCU HC05B16 (0D60J). In carprog the only option with that mask is HC05B6, whereas HC05B16 has a mask of (0F62J).

Both seem to read but fail on verifying, same story with writing.

To add another spanner into the works the actual chip inside is this.


M100
LC501691CFN
6531672050
0D60J
QQBG9938


I hope someone can help me!

Thanks.

[rickyboy]

By some miracle I've managed to get it to verify. :top: It was the oscillator that needed adjusted. For anyone else with the same problem you need to change it to 4999Khz.

Now can anyone help with the dump to clear the bad data? Here it is...

257570