Renault Clio 1.5DCI IMMO OFF

[joe1953]

Hello,

i want make IMMO OFF fot this car
Renault Clio 1.5DCI

i have 2 ECU. ONE for immo and one for engine.

Here to pictures:

P8200207135

inside are 2 eeprom one i think for can is A82C50 and 93C66


how can i make immo off, does someone know??

[lupu_sandu]

WTF is this? You say that you have a 1.5 DCI and you post pictures from 1.2 petrol ecu?

[Mr BLACK]

A82C50 ...is CAN controler not eeprom

[joe1953]

sorry first picture is wrong.
I found on forum: http://www.digital-kaos.co.uk/forums/f178/renault-clio-1-5dci-bsi-297663/ solution but dont understand what they mean with swap eeprom.

here is the eeprom content

[albertros]

Hi
the picture is a body contol module = UCH
The ecu is prob a delphi DDCR if the car is a 1.5 not a 1.9
there is no immo off for this ecu so post your problem and fix the fault.
Oh tell a lie it can be done with JULIE carlab immo emulator

[elmassioui]

for immo off imposible

[joe1953]

friends i dont understand nothing ..... IS it possible to make IMMO OFF?
i have posted post Renault Clio 1.5DCI BSI (http://www.digital-kaos.co.uk/forums/f178/renault-clio-1-5dci-bsi-297663/) here is a solution for the same problem.
Can someone explain how to make IMMO OFF?

in the post they say: The memory, data location is 93C66, exchanging chip "93C66" or copy data from the old to the new bsi.

so just buy new eeprom 93C66 and copy the data from the old eeprom to the new and all problem solved?

[albertros]

You have asked for immo off. Not virgin dump or dump to use second hand ECU.
The only way is to buy can bus emulator from carlab called JULIE it works

You need to immo off engine ecu NOT the body control module. The BSI (BSI peugeot term, renault call it uch) post you reffer to is nothing to do with immo off.

So why do you want immo off? It will be better to fix your problem.

[joe1953]

sorry i asked for immo off because i want car start.
So the BSI is not important in my issue you say.

Which Julie emulator should i buy to start car? do you have link which one right one ?

Thanks

[albertros]

CarLabImmo - immobilizer problems ? emulator immo for Renault Fiat VW (http://carlabimmo.com/)

First I assume that the car key, uch and Ecu all belong together.
Then you see what the immo light is doing So key out = about once a second, then turn on and ....?

If you want to use a good used ecu you can swap eeproms but you may need to re-prog injectors, having said that they will run with the wrong codes.
If they go to default codes the car will start but not rev. Swpping ecu will only work if the ecu is faulty.
More likley on a clio is faulty key, or fuses & relays in fuse box next to battery.

[joe1953]

friend, car is not here i got from the customer just the ecu and the uch.
And he told me the light is flashing very fast and car doesnt start.

i want use the ecu and uch which have send me the customer. So Swap eeproms mean, copy the data fom the actual soldered eeprom to the new eeprom which i buy. And then it could work ?

[albertros]

Flash fast means still immobilised. = Faulty key rectangular relays in fuse box near battery or rusty fuse holder in same place.
Uch and ecu does not often stop car from starting.
Start re-solder 7946 in key