PDA

View Full Version : opel astra H security code........


antwnhszr
29th April, 2014, 02:27 PM
hello all m8'si have one opel astra H with ecu ME.7.6.1 and i need to chainge that.i get with opcom on the instrument's , ecu , and the CIM but i don't see anywhere the security code...i post all the foto's nad maybe someone can help me?how to find the security code?
thank you all.
regard's
tqnata83
29th April, 2014, 03:09 PM
read dash with opcom and post dump for pin
or
replace eeprom from old to new ecu
antwnhszr
29th April, 2014, 08:40 PM
m8 that ecu is hybric ecu.....
ninja123
29th April, 2014, 08:47 PM
how do you read dash with op com??

please tell info....

ninja
flyins
29th April, 2014, 11:00 PM
read dash with opcom and post dump for pin
or
replace eeprom from old to new ecu

hi friend not only ninja, but i want too know how you read astra h pin from dash with op-com as i really would like to know?, as for long time i read eprom!
Are you sure your not confused with corsa C ?
exe123
29th April, 2014, 11:52 PM
tqnata83 (http://www.digital-kaos.co.uk/forums/members/401548-tqnata83/) is totally wrong. I guess he never worked on Astra-H with Op-Com.

Op-Com advanced (original) is capable to read pin from Astra-H
form EDC16C9 only and from DIS (Borg and Delphi) via OBD.

As you recognized ME7.6.x is hybrid. Carprog can read some of them.
It is easy to get the login via eeprom programmer from IPC, DIS or EHU.
So no way for you via OBD. You have to disassemble one of the mentioned devices.
gokey
30th April, 2014, 06:21 AM
avdi read pin by obd
chiorbeq
30th April, 2014, 06:36 AM
Read the eeprom from CIM and put here !
ninja123
30th April, 2014, 07:37 AM
Pin from display too, read and post.

ninja
gokey
30th April, 2014, 08:14 AM
have some possibility !
simaservis1108
30th April, 2014, 10:28 AM
Post CIM dump here.EFfi can give pincode.
antwnhszr
30th April, 2014, 01:01 PM
thank you all guy's for your answer's i try to read the cim and i post here.
best regaed's
exe123
30th April, 2014, 01:50 PM
I would stick to the display, dashboard or radio, as they are much easier to remove then the CIM. For CIM you have to remove the steering wheel. Depending on the CIM version you will have eeprom or secured mcu.
flyins
1st May, 2014, 10:09 PM
I would stick to the display, dashboard or radio, as they are much easier to remove then the CIM. For CIM you have to remove the steering wheel. Depending on the CIM version you will have eeprom or secured mcu.

yes as exe123 states stick to dash mate and read eprom, really easy and fast to remove, saves all the messing, if you need to change engine ecu dont forget you need the pin for the new one if its a used part or buy reset, or get pin from ecu