Renault clio 1.2 SIRIUS 32N S110138000 B IMMO off

[gbratk]

Hello,

Can someone please make me immo off in that file.
Car is renault clio 1.2

Thank you
258163

[marsete]

Hi friend test this file and cut pin 58 for not comunication with immo box.Download this link...https://mega.co.nz/#!vN1DmapL!LN7f7NVUuUpQPX2u1d9ckNgh1Zx3uQafYsLoZ5m uM4M.Regards

[gttuning]

is it 8 or 16 valve?

[LATTINO]

your immo off

[gbratk]

Hi friend test this file and cut pin 58 for not comunication with immo box.Download this link...https://mega.co.nz/#!vN1DmapL!LN7f7NVUuUpQPX2u1d9ckNgh1Zx3uQafYsLoZ5m uM4M.Regards


This is completely different map, so I don't believe this will work.

[gbratk]

is it 8 or 16 valve?

It is 8v without AC

[gbratk]

your immo off

I tested your file but car won't start.

[sepistar]

if ecu has can line then only emu helps,mate.
br.

[gbratk]

How can I know if it have Can line?

[gbratk]

There is missing eeprom o board and I do have 58 pink wire, so this one is WITHOUT CAN.


Please does anyone have working solution.

[2xded]

See pinout connection ECU on scheme.
Do you have a scheme for your car?

[Shmortz]

here is your dump off, cut pin58

[gbratk]

I already figure out that is that this ECU don't have can.

So Immo off must work without emulator, but I need good immo off file.

Please anyone.

[Shmortz]

I have send you tested solution, what else you want man ???
...if car not start with my dump you have another problem!

[gbratk]

I have send you tested solution, what else you want man ???
...if car not start with my dump you have another problem!

I was answering to 2xded, and in the meantime you post your file.

I'll test it and let you know.

I test it wit this map, which has similar corrections like your but it won't start.

258251

Thank you

[sepistar]

hi put this one,should work.
258289
br

[gttuning]

so far i know 8valve emu only.not sure

[gbratk]

here is your dump off, cut pin58

I test your dump, but car wont start...

[gbratk]

hi put this one,should work.
258289
br

I test your dump also and car starts, but it runs like crap and it dies at idle.

[gbratk]

Does anyone know what could be difference between sepistar and shmortz dump, that car starts with sepistar dump and don't wont to start with shmortz dump.

Any help appreciated.

Thank you

[gbratk]

Solved!

I had issue with programer which didn't write Shmortz dump correctly. However I program eeprom again with Shmortz dump, and car starts, and woks fine.

Thank you all for help.

[makisgeorge]

hi to all,
can someone upload again clio 1,2 off.zip i cannnot download it.thanks (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=258289&d=1399046858)