Daewo Matiz Key Problem

[3R1]

Hi to all.
I have a problem with a Daewoo matiz 2002 key.
Costumer lost the first key ( which he used all the time in 2 years ) and when he tried the second one it didn't work
When the ignition is switched on the immo light goes off and after 3 sec it comes back flashing
Can someone please verify the 93lc56 dump .
The Id of the second key is
ID:807D608B

and if you can add this key with this ID too

ID:E22EEC3E

Thanks a lot

[madzar]

Program new 93c56 with old content and add key with T300 100% works

[immokill]

Program new 93c56 with old content and add key with T300 100% works

Or , just try to add key with T300 or SBB . Worked for me.

[3R1]

Thanks guys for the reply but tried both of them.
First changed the 93c56 eeprom and after tried to add a key with TEXA but neither of them worked
Thats why I want to know if I can add that key directly to data without try with equipment
If yes can you modify the data with that keys ID

Thanks

[ekvas]

Or , just try to add key with T300 or SBB . Worked for me.

YES, in daewoo is a lot going on

[madzar]

Thanks guys for the reply but tried both of them.
First changed the 93c56 eeprom and after tried to add a key with TEXA but neither of them worked
Thats why I want to know if I can add that key directly to data without try with equipment
If yes can you modify the data with that keys ID

Thanks

I will send you working files with keys AND you will add key easy


Sent from my iPhone using Tapatalk

[igorr]

you nead first to reset ecu and then program keys and all be fine

[3R1]

This solution haven't tried igorr
Will try and give the report
Thanks

[madzar]

Here is example just check maybe files are swaped.Also check sichronization like Igorr mentioned

[3R1]

Thanks a lot guys for your help. Will test them tomorrow morning and let you know. :)

[ciptel07]

use blank id 48 and program with t300