PDA

View Full Version : Peugeot edc15c2 1 plug immo off



atomiczen
6th May, 2014, 10:51 PM
Hi i need to immo off a edc15c2 peugeot 206 hdi 2.0L hw 0281010250
i try several files found on old thread, immodec 3.2, never start
it start only if i remove e2p from board, but engine rpm on dash don't work.
any solution?
here flash

gyapi11
7th May, 2014, 05:11 AM
Hi. Try it.

atomiczen
7th May, 2014, 09:25 AM
ok i'll try

TPS
22nd July, 2014, 02:08 PM
Hi i need to immo off a edc15c2 peugeot 206 hdi 2.0L hw 0281010250
i try several files found on old thread, immodec 3.2, never start
it start only if i remove e2p from board, but engine rpm on dash don't work.
any solution?



regards

danielif
22nd July, 2014, 05:29 PM
Hi i need to immo off a edc15c2 peugeot 206 hdi 2.0L hw 0281010250
i try several files found on old thread, immodec 3.2, never start
it start only if i remove e2p from board, but engine rpm on dash don't work.
any solution?



regards

Hi. Try it, and don't touch eeprom.

TPS
22nd July, 2014, 06:21 PM
car not start with your file e2prom is ory

I write your file with galeto


My ECU is with ONE plug

regards

gyapi11
22nd July, 2014, 08:06 PM
Hi. Immo off . pass pm

TPS
22nd July, 2014, 08:45 PM
tomorrow I will try

regards

TPS
23rd July, 2014, 12:01 PM
gyapi11 (http://www.digital-kaos.co.uk/forums/members/268568-gyapi11/) , everything is ok

Thanks

regards

guillermoberenguer
13th November, 2015, 12:41 AM
341183341184please i need help 0 281 362 i try with inmokiller and meccuci and not start

guillermoberenguer
13th November, 2015, 12:43 AM
341185
here flahs

guillermoberenguer
13th November, 2015, 02:48 AM
Hi. Try it.
Please pass

cristi_bv
13th November, 2015, 08:00 AM
hello,gyapi11, can you please give the pass for you're file?thanks

guillermoberenguer
15th November, 2015, 09:55 PM
Hi. Immo off . pass pm
please pass

motom
4th February, 2016, 04:01 PM
Hi. Immo off . pass pm
Hi.
Please pass me.
I have the same car immo problem.
Thanx. moto

johan240
6th June, 2019, 05:58 PM
Gyapi11 pass please

Enviado desde mi HMA-L29 mediante Tapatalk