PDA

View Full Version : Fgtech V54 from obdauto



obnchip
10th May, 2014, 09:47 AM
Anybody have this v54 from obdauto?Any experience?I just ordered one,will try and share experince...

2014 Latest Version V54 FGTech Galletto 4 Master BDM-TriCore-OBD Function-OBDAUTO---BMW OPS VAG-COM,Tacho Universal,KWP2000,BMW Scanner,BMW Carsoft,ELM323,Code Reader,Can-bus (http://obdauto.com/views.asp?hw_id=2743)

xanubysx
10th May, 2014, 01:16 PM
sometimes work.. my friend buy and must change few components :) after work ... .. EU clone is better :)) No problem !

morgano
10th May, 2014, 02:47 PM
Poured with shit PCB, better stay away if you need to change some component just after buy.

spychu14
10th May, 2014, 03:33 PM
EU Clone is fine quality. Look at this shitty epoxy, PCB, relays...

digi men
10th May, 2014, 04:40 PM
Most interestingly, all criticize Chines tools, but they buy and use them yourself, even if you change all components with a little knowledge, you can have a good tool cheaper than eur clone, if we are realistic, not every eur Clone is good, and have no support, show one euro clone that works as it should without error, and has excellent support, clone is a clone, some better some worse, no one's perfect, everything depends on the price that a person can spend for a Tool !

obnchip
10th May, 2014, 05:19 PM
For this price can try i think and repair.Anybody know what to change to make it better?

morgano
10th May, 2014, 05:25 PM
First of all fight to remove the glue without damaging something neither pcb nor components, after that repair is child's play.


Regards,

obnchip
10th May, 2014, 06:08 PM
After remove the glue what to do?

morgano
10th May, 2014, 07:18 PM
Fix the problems you experience (if any) while using your tool.


Regards,

sinan33
11th May, 2014, 07:48 AM
Not all chinese clones are crap; first get your tool and test it,if you meet any issue then repair it.
I have met an event last month; chinese v53 read and wrote an ecu but v54 eu can't do.
Everything is related about your luck with clones.

arvedo
11th May, 2014, 10:30 AM
that's true friend I had and some European ECU did not work, and the clone v53 works great without me changing anything.
You have to be careful not to hit since they are devoid of tin and you may fault
;)

darius89
11th May, 2014, 11:07 AM
Have problems with Obdauto. Sent him back for repaire Renesas srs tool, and now 2 month didnt fixed and didnt replay my emails.

obnchip
11th May, 2014, 11:08 AM
5-30V Car / Industrial Vehicles, L line / K line KWP, CAN
Can Bus V2.0 50Kb > 1000Kb
J1850 VPW PWM GM -FORD
Rx Tx RS232,
RS 485,
Automatic setup Pull up K-L line 250, 500, 1000 ohm,
Automatic setup termination Can bus 0, 60,120 ohm,
is it can be right?what else can be bad,what to repair?

obnchip
11th May, 2014, 11:11 AM
i use to order before obdauto and everthing was right no need to send back.

datapage
11th May, 2014, 12:26 PM
[QUOTE = darius89; 2293856] Tem problemas com Obdauto. O mandou de volta para repaire ferramenta srs Renesas, e agora dois meses n?o fixas e n?o repetir meus e-mails. [/ QUOTE] off topic
darius89 (http://www.digital-kaos.co.uk/forums/members/125075-darius89/)that problem in your renesas? CG100?

obnchip
11th May, 2014, 03:54 PM
Anybody know the type of the relays?

darius89
11th May, 2014, 06:35 PM
Soft didnt see hardware

obnchip
12th May, 2014, 05:31 PM
My v54 arrived today.Looks all ok!
Try on obd Alfa edc15c7,audi 1.9tdi edc15v,bmw x5 edc16c31,all ok!

sinan33
12th May, 2014, 07:33 PM
did you try its bdm?

obnchip
12th May, 2014, 11:18 PM
not yet but i will try...and also tricore boot on edc17cp45 soon...

spychu14
13th May, 2014, 08:56 AM
This PCB looks familiar to the portugal project. If you gonna have some problems with BDM port - PM me :)

obnchip
13th May, 2014, 09:18 AM
i use bdm 100 i got it for edc17 tricore boot.do you know about it how it works?not try yet.

2xded
14th May, 2014, 05:53 AM
bdm 100 not for edc17 tricore.

obnchip
14th May, 2014, 06:52 AM
I know.i use for bdm ,bdm100 not galletto.i got v54 for tricore bootmode.

lucim12
14th May, 2014, 07:37 AM
Ive bought it from chinacardiag but bdm don't work..

obnchip
14th May, 2014, 08:37 AM
Is it same inside?have you try on tricore bootmode?

obnchip
18th May, 2014, 11:45 AM
Bmw edc16 c35 read,write ok by obd.

digi men
18th May, 2014, 08:24 PM
VW TOURAN 2.0TDI 2007 EDC16 R/W OBD OK
BMW E39 1999 3.0D EDC15 R/W OBD OK

obnchip
19th May, 2014, 11:40 AM
Audi A6 2008 2.0tdi 143hp edc17 read,write ok by obd.

tagar
19th May, 2014, 02:41 PM
Audi A6 2008 2.0tdi 143hp edc17 read,write ok by obd.

highly appreciated if you can check on a hyundai/kia edc17cp14.

carmageddon
19th May, 2014, 04:02 PM
Anybody know the type of the relays?

change with this :

2 pcs : OMRON G5V-2-H 12DC

1 pcs : OMRON G5V-1 5VDC

obnchip
19th May, 2014, 05:26 PM
https://www.distrelec.hu/ishopWebFront/search/luceneSearch.do?dispatch=find&keywordPhrase=g5v

obnchip
28th May, 2014, 07:10 AM
Just try on bdm,works right...

obd.tech
31st May, 2014, 11:56 PM
Any more feedback on this V54 china clone?
Whats working.....whats Not?
Has everyone got the glue on the PCB?
These are similar in price to the V53........whats the advice on which to buy?

morgano
1st June, 2014, 02:11 AM
Vista 64Bit seems to give a lot of problems, at least dutch version, lol

lucim12
3rd June, 2014, 07:07 PM
Here is chinese version with glue and bdm not working..:beer:

262345

obd.tech
3rd June, 2014, 08:18 PM
Here is chinese version with glue and bdm not working..:beer:

262345

less glue, which is good. What happens on BDM? Did you have good connections to ecu?
Anyone else knows what could be wrong here?

lucim12
3rd June, 2014, 09:05 PM
yep, its the unit that has issue, changed everything besides the unit, cables, adapters etc..

there must be some components that need changing to fix this.. like in old fgtech.. as I still use it :smile: