Opel Astra H Diesel 1,7 - BOSCH 0281011943 ECU NO COMMUNICATION

[joe1953]

Hello,

i have this ECU from Opel Astra H. Car doesnt start and no communication with ECU.
i did just Diagnostic from car not from table because i dont have the PINS which needed for diagnostic on Table.

Car is Diesel 1,7 - 101 ps and from YEAR 2005

How is possible to silve this problem buy new one and remove IMMO?

[Shmortz]

no immo off, find same ECU, reset it and program it to car...

[joe1953]

how is reset it , never done it before for engine ecu...

[easternghost]

hi carprog can reset the ecu
You can also try to read the old ecu via bdm and copy them to the new :joyous:

[joe1953]

thanks easternghost...
first what is bdm ?
and which eeprom should i read from old ecu and write them to new ecu??

[Shmortz]

BDM is interface to read/write eeprom, flash and MCU, if you have one you can read all from old and write to new ECU...
better find other ECU and read eeprom with external progamer, make it virgin and then marry it to car...

[easternghost]

look for 95320 read and put here :joyous:

[joe1953]

inside is just 95160 no 95320.

here is the file:

[DJairbag]

can i do reset on bench ?

[KILL_THE_IMMO]

YES OF CORSE

[DJairbag]

but i dont have car prog, reset with op com on bench or from flash manual programming?