PDA

View Full Version : PROBLEM TO READ BDM ECU DELPHI FORD MONDEO



arielcalcaterra
11th May, 2014, 04:33 PM
Hi friend.
I'm trying to read a delphi ecu Ford mondeo 2.0 engine
car year is 2008.
bdm100 connect my programmer as shown in pictures but I can not have communication with the ecu.

I have fed the ecu and the BDM interface with 12v.

BDM tells me there reading error or do not find the ecu.

There are some other connexion I should do?
Someone had this problem?

thanks.
259557259558259559

wiski
11th May, 2014, 07:43 PM
Probably it is with spansion flash . Bdm100 clone can't read it.

Sent from my GT-I9100

arielcalcaterra
11th May, 2014, 08:28 PM
have tried to read this ecu FGTECH 5.0?

is no need for another connection?

smayer
11th May, 2014, 09:09 PM
Your adapter is wrong to this ECU. Check ECU BDM pinout and solder wires.

CIONUT
8th September, 2015, 08:12 AM
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=329865&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=329866&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=329867&stc=1