IBIZA 6L Cruise control installation

[immooff2]

Hi all,
Today, I have installed cruise control stalks into Seat Ibiza 6L 2007 1.4 63kW. I have activated it throught VAG-COM => ENGINE => LOGIN => 11463 for cruise control activation. Coding is accepted by ECU, but it doesn?t work at all. Cruise control is not working. Do you know where could be the problem? It is needed to activate in another ECU?
Thank you for your help.

[immooff2]

no idea ??

[Diagi]

No fault codes stored in ECU? Check also clutch pedal sensor and brake pedal sensor if they are working correctly. If yes then check cruise control system indicator stalk wich you build in if is working correctly (if the part you have bought was used). Every signal i stalk check with multimeter. You can do it also in VCDS measuring blocks, I dont know which blocks in your ECU but it should be described if you have genuine one.

[immooff2]

Yes, there are no faults stored in ECU. Coding was accepted, so I don?t know where is the problem.

[Diagi]

So follow my two other sugestions and report.

[Diagi]

This will be obvious but i will ask anyway, of course you have connected new wires from CCS stalk to bordnetz and ECU ?