View Full Version : DPF OFF FOR ISUZU NPS 300 Transtron ecu!!!! Now can be don
Miketune
20th May, 2014, 12:07 AM
Hi Guys,
DPF removing for the Isuzu NPS 300 with Transtron ecu can be removed ;)
for more info please contact me ..
regards Miketune
jjrp255630
20th May, 2014, 08:54 AM
you can do isuzu NKR 3.0?
regards
gttuning
21st May, 2014, 07:38 PM
Hi Guys,
DPF removing for the Isuzu NPS 300 with Transtron ecu can be removed ;)
for more info please contact me ..
regards Miketune
it sounds like advert man!!
seven
8th June, 2015, 06:19 PM
you can do isuzu NKR 5.2?
regards
Miketune
8th June, 2015, 09:51 PM
yes can do transtron ECU DPF OFF and EGR off :)
Isuzu NPR,NQR,NPS ,Dmax
PM please
smayer
9th June, 2015, 12:50 AM
it sounds like advert man!!
Do you see this member do another thing then advert ?
soundnavigator
9th June, 2015, 09:16 AM
No problem to be done full DPF and EGR OFF on Isuzu Transtron ECU with 3.0 and 5.2 engine.
ominimicu
9th June, 2015, 09:58 AM
Ifu can do it post a ori and DPf off file here :D:D:D:D
waldi1979
7th November, 2015, 05:36 PM
Hi,
I have Isuzu NPR 3.0D 2014.
This car drives every day 600km and I need tested solution (DPF+EGR off).
Is possible for me to read Transtron 2014 by Piassini?
Is there anybody who has tested solution?
wiseman
7th November, 2015, 11:51 PM
yes but you will need dealer tool or Gscan to reset DPF counter after writing MOD file
mihaiservice
8th November, 2015, 02:04 AM
If differential pressure sender are damage that DPD light from dashboard will be ON !
waldi1979
8th November, 2015, 08:10 AM
I have Gscan and I can reset DPF counter. Diff pres sensor is OK. I will try to read it on monday.
waldi1979
8th November, 2015, 07:12 PM
Piasini can read and write Transtron.
In order to read you have to connect 2 wires to the board and 8 wires directly to MCU - it isn't easy.
To write you have to connect 4 wires to the board, 1 bridge and 1 capapacitor - easy.
goktugu
6th February, 2017, 02:53 PM
Which tool do I need to use KESS or Piasini?
teoturo
6th February, 2017, 03:10 PM
Galletto by OBD :stung:
Act Tuning
6th February, 2017, 03:30 PM
Best to read them with ktag or pcm,
S.W.A.M.I
25th April, 2017, 03:02 AM
Good day,
anyone know how to reset PM meter on dash after dpf off ?
tried with launch x431 , dpf counters all show 0 , PM meter on dash still shows 3-4 bars
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.