polo vivo 2013 ecu replacement advice needed

[raptureready]

hi there
got a customer that had his ecu stolen, he bought a brand new ecu from dealers, its the one made in india, got BENZIN 7GV CLPB MAGNETI MARELLI on it, ive attached a photo, what would I need to do to make this work on this car, as far as I know he has the keys for the car, I have original avdi, never done this before, any advice welcome
kind regards

[haroutioun]

hi there
got a customer that had his ecu stolen, he bought a brand new ecu from dealers, its the one made in india, got BENZIN 7GV CLPB MAGNETI MARELLI on it, ive attached a photo, what would I need to do to make this work on this car, as far as I know he has the keys for the car, I have original avdi, never done this before, any advice welcome
kind regards
Hello.
my friend,avdi have a problem with this ecu 7GV.
1) try connect new ecu to the car and by avdi try read ecu NORMAL and after u see he can't read ecu,but with vcds u can read normal the ecu.1 year ago i send to abrites support massage about this,but till now no solution 4 this,i hope soon come out this problem.
2) check your pm.

[bonecrusher]

I had the exact same issue with a customers ecu stolen vivo, save your time and just take it to the dealers

[lupu_sandu]

Hello.
my friend,avdi have a problem with this ecu 7GV.
1) try connect new ecu to the car and by avdi try read ecu NORMAL and after u see he can't read ecu,but with vcds u can read normal the ecu.1 year ago i send to abrites support massage about this,but till now no solution 4 this,i hope soon come out this problem.
2) check your pm.

Avdi added this ecu this year on last vag update on 10.03.2014.
How you try to read this ecu one year ago?

[haroutioun]

Avdi added this ecu this year on last vag update on 10.03.2014.
How you try to read this ecu one year ago?
Lupo- sandu,i am writing about read normal ecu faults = diagnose,i don't write about read eeprom of ecu like 4HV.so with avdi u can't read ecu faults for 7GV + eeprom to try get pin + CS ,but with vcds can read ecu faults or connect to ecu.so in this case the answer from support of avdi is to me,try send us some 7GV ecu to try work on it to solve.if u don't blivet me u can contact to abritus support and ask about me.

[raptureready]

262194262195went to car today, fitted new ecu, read the ecu dump via avdi, attached file, it gave me a pin of 39321 and component security of 66 66 99 99 66 66 66 ,could not connect with cluster, so took out cluster and read 93c86 and also attached,the cluster dump gives me the pin of 03511 and gives me correct vin number, the cluster is a vdo and says VWZ7ZON1675665 V08 6QS920 803, the original key of car is a id48, what must I do next, any ideas guys , regards

[raptureready]

forgot to add the vin is: AAVZZZ6SZDU023685 and immo id: VWZ7Z0N1675665
kind regards

[lupu_sandu]

ECU is brand new? I read in 1st post. Try to make adaptation via AVDI on change ECU, or normal adaptation via channel 50.

[raptureready]

went to car today and scan all units, only connects to 08 climatronic/auto hvac , 09 central electric, 19 can gateway, 46 comfort module, not the ecu or cluster, not sure why , left ignition on for a while also, but no go.
anyway all the best

[lupu_sandu]

For you car:

CS: 02 B8 34 F2 8E 18 FD
Pin: 03511

Even VCDS 14.xx cannot connect? I'm pretty sure that will work.
Put this dump in ecu, then make adaptation via channel 50.

[ginorini]

do you have ross tech vcds? I have done it with it.