PDA

View Full Version : Trionic8


zodiname
6th June, 2014, 10:52 AM
Have any one this script Universal BDM scripts for Trionic 1_2.zip (http://forum.ecuproject.com/attachment.php?attachmentid=5551&d=1385905319) from this site Universal BD32 scripts for Trionic5.x, 7 and 8 ECUs (http://forum.ecuproject.com/showthread.php/4165-Universal-BD32-scripts-for-Trionic5.x-7-and-8-ECUs)
because I not have permission to access this page.(file)
thanks
zodiname
8th June, 2014, 07:27 PM
solved , i find


Wysłane z mojego SM-G386F przy użyciu Tapatalka
Rito
8th June, 2014, 11:30 PM
Post here Where you found?
Maybe you looking for it?
Tuning ECU | Hardware and software solutions (http://www.ecubay.com)
VRPerformance
10th June, 2014, 11:24 AM
post here,i wont to see them also :)
soxten
6th August, 2014, 01:41 PM
Here is how to clone Trionic8

Working 100%

Easy way to do this is
1:Read broken ecu by can (fgtech) and save "original.can.bin"

2:swap byte in file and save as "original.bdm.bin"

You have now 2 files!

3: program used ecu by fgtech BDM with "original.bdm.bin"
OR program flash by desolder flash and program with Wellon with file "original.bdm.bin"
(I like to desolder and program on my wellon)

4:program used ecu by fgtech can with file "original.can.bin""

Mount in car and start!
jhonyvyrus
30th June, 2018, 05:41 PM
hy i reed flash from old ecu now car start but run like hell i need swap byte from bin can you doo this
mrchip
24th September, 2018, 05:34 PM
Here is how to clone Trionic8

Working 100%

Easy way to do this is
1:Read broken ecu by can (fgtech) and save "original.can.bin"

2:swap byte in file and save as "original.bdm.bin"

You have now 2 files!

3: program used ecu by fgtech BDM with "original.bdm.bin"
OR program flash by desolder flash and program with Wellon with file "original.bdm.bin"
(I like to desolder and program on my wellon)

4:program used ecu by fgtech can with file "original.can.bin""

Mount in car and start!
Hi Soxten
I have same ecu from Fiat Croma 2.2 ( tronic 8 ) and need to clone to donor ecu.
you say : 1:Read broken ecu by can (fgtech) and save "original.can.bin...... I dont see in the menu of Galetto this ecu,,,Need I to use menu of Saab by OBD ?
or need I to choese JTAG BDM MC33xxx in galetto ?
this my ecu 12598024ab g04001 but car is far way
thank you