Grande Punto 1.3 multijet P0101

[bobolin4o]

Hello, need help with this...
The car is Grande Punto with 1.3 MM 6F3 ECU.
The problem is only during deceleration, ECU shows error P0101. The car is with removed FAP and blocked EGR (Swiftech)...
I think the problem is caused by higher flow thru MAF in deceleration (because of empty FAP).
Please someone to delete P0101 from dump!
Original dump is in attachment.
Regards and thanks in advance!

[robert02500]

hi try this
report plis

[Babos]

Your mod file.
Best regards.

[bobolin4o]

hi try this
report plis
Not work, DTC is still there...
Thanks anyway!

[bobolin4o]

Your mod file.
Best regards.

Honestly, I've not tried your file on the road, the effect that I saw is - with recorded and still not erased error, no longer displayed freeze frame for this DTC...
Anyway, thank you for the help, but i found another solution of this problem with greatest help from OEM...
Subject is closed.
Best regards to all!

[lukash3]

Hi, can you advise how you fixed that?

[bobolin4o]

Hi, can you advise how you fixed that?

Yes - by changing the one of requirements for detection of this DTC.
Regards!

[mario38]

Hello, need help with this...
The car is Grande Punto with 1.3 MM 6F3 ECU.
The problem is only during deceleration, ECU shows error P0101. The car is with removed FAP and blocked EGR (Swiftech)...
I think the problem is caused by higher flow thru MAF in deceleration (because of empty FAP).
Please someone to delete P0101 from dump!
Original dump is in attachment.
Regards and thanks in advance!

if you want to test my solution

[bobolin4o]

if you want to test my solution

Mate, this issue was solved 2014...
Read again the topic... but i thank you for your effort anyway!
BR!