honda jazz 2007 key programming

[ninja123]

What tool can program this car? Transponder is 8E type.

I dont have ori AD stuff :(

ninja

[Atex31]

Godiag T300+ does it,



X-100 failed on the last one of those but there have been updates since then.

[leandroks]

I ve programmed with fly and new autel mp908

[MOHCIN2]

AND the chip what kind of id chip can fit in while programmed the new key

[ninja123]

great, i dont have any of these tools either!!

Very annoying when you need to buy a new tool just to cover 1 type of 1 car :(

ninja

[gwee]

use sbb clone

[ninja123]

Tried but dont work, only lists jaz up to 2007 which is the ID48 version, I have used this before and works ok on ID48, but tried on this car and dont work, i tried all models on usa menu too and none of them worked.

Im supprised that old MVP dont work, as it does work on the later CAN model jaz 2010 onwards by choosing type 10, but tried most types from 5-12 and dont work either :(

ninja

[autoenthu]

Tango , tm pro can do that read 93c66 and register direct

[ninja123]

wouldnt mind eeprom job if it was lost keys, but thats a bit extreme for a spare key, and most customers dont want any intrusive work for a spare key.

ninja

ps - any KAP customers had there update yet?

[iamfooser]

Old mvp should work. U need a Honda adapter for it to communicate. It should be type 12 if I remember correctly. It will request for incode as well.

Sent from my HTC Desire 600 dual sim using Tapatalk

[workdamnyou]

Launch will do it if you have one mate.

[ninja123]

going back with launch today :)

ninja

[Atex31]

going back with launch today :)

ninja


How did you get on mate?

[keygargoil]

t300 with the honda adapter use type 4 can and it will add the kewy no problem used it many times

[ninja123]

I have 2 honda adapters, 1 that fits on the end of main cable (no numbers on it, just says honda) and another that fits to the mvp first, do you know which one it is?

Ive not made it back to this car yet as mad busy :)

Thanks for your help guys.

ninja

[ninja123]

ok, done this one now, tried mvp with honda dongle on type 12, worked fine :)

thanks for the info guys

ninja

[workdamnyou]

I have genuine ADPro mate. But always use Launch for Honda key jobs. No need to mess around with cables dongles or selecting systems. Try it next time and you'll see what I mean.

[autochei]

u use mvp clone or original

[ninja123]

old clone, not pro or m8 :)

ninja

[stalonerambo]

sbb good clone, will do it,

[ninja123]

no it wont

[dyzio]

that honda jezz need pin??

[tkumonryu]

x100+ no problem, no pin required.