PDA

View Full Version : Help with immo off Citroen Xsara Picaso 2.0 HDI , bosch edc15c2


overs0ull
12th June, 2014, 03:52 PM
hi friend please help me with immo off on citroen Xsara picaso 2.0 HDI edc15c2 2003 year 90h.p.
The keys is lost all of them .
Ecu : 96 515 934 80
0 281 011 521
This is the ori flash and 5p08
eeprom ori :- 264077i read it again and this time sopouse to right i compare with others
flash ori : 263640
Thaks for helping
Regards.
zoyzoyni
12th June, 2014, 07:37 PM
263696
they are two version one with 95p08 and one flash 29f400 for off this ecu.your 95p08 is not correct size,so i send you 2nt versionwith flash.
overs0ull
12th June, 2014, 07:48 PM
Ok mate thank you I will replay tomorrow the result . I am sorry for wrong size on 5p08 maybe my programmer make some foult.
If not work I will post new dump 9p08 tomorrow
Thanks I will replay the result
overs0ull
13th June, 2014, 09:19 AM
Hi i test the file but i don't know are it work cause - the problem is on fouthly ecu - i try to connect with it on the bench to read it and i can't , i try on the car but still the same with - kess v2 , galleto 2 , mpps not luck . i read the flash but i can't connect whit the ecu on the car .
I will replace the ecu and will try to remove immo on the other ecu . thank you for helping
pagautas
15th June, 2014, 07:42 AM
solder out 5p08 when doing this ecu on bench


Hi i test the file but i don't know are it work cause - the problem is on fouthly ecu - i try to connect with it on the bench to read it and i can't , i try on the car but still the same with - kess v2 , galleto 2 , mpps not luck . i read the flash but i can't connect whit the ecu on the car .
I will replace the ecu and will try to remove immo on the other ecu . thank you for helping
overs0ull
15th June, 2014, 09:20 AM
I read the 5p08 eeprom again this time i thing - right i replace the rar now i hope all be fine.

Update the ecu is damaged for that i can't connect everytime .
Now i will change the ecu with other - but the same hardware like this edc15c2 and i need immo of in the ori flash and 5p08 flash to i can replase the eeprom 5p08 and flash the new edc15c2 (29f400) with ori software but without immo to i can start the engine .
Thanks to all