hyundai atos prime 2005 ecu help please

[raptureready]

hi there
the ecu of the car was stolen, so customer got 2nd hand one , attached is the pictures, the keys are id46
they cant get the vin for the said ecu, can someone tell if I could read anything to get the vin then I can get pin and program new keys in, or could I write keys into ecu? got tango but don't see any modules like it,
any advice appreciated:joyous:263905263906

[PIC18F2550]

Hello


try this file "immo off"

[raptureready]

thanks for the immo off file, but I cant find any 95040 in this ecu, the keifico ecu has this 95040, I cant find anything in this ecu that I recognise, but thanks anyway for trying:joyous:

[Meat-Head]

Have you tried normal eobd scanner see if vin comes up

[raptureready]

thanks, I tried avdi but couldn't connect with this car , will try some other machines and c if vin comes up, thanks again , sitting up in Africa waiting for the 12.00pm England and Italy game:joyous:

[Meat-Head]

Does the junk yard know the vin?

[raptureready]

they busy trying to trace ecu back to scrap car in the mean time, this ecu got a st chip 29EE512 , dealers say this ecu is not that common, all the best

[PIC18F2550]

sorry for my english

i rend this dump from same ecu and all car atos is sold in algeria without immo (no immo)
the eeprom 95040 is placed in "U400" and my ecu is same with your picter only the "U810" and "Q530" is removed from PCB good luck friend
264155

[easytech]

I'll think the software in the 29EE512-U410 will be different also then.
Can you read this flash?

[raptureready]

ive got orange5 and omega orange, I will check if the omega can read it, is the id46 key data in this processor , someone recons its got an immo box, but ive looked and cant see any just found a small box that tango says is a immo amplifier, that u400 chip can it be read as a 95040, is there key data in there, or will this corrupt it if I try to read?
thanks for the help so far

[PIC18F2550]

I'll think the software in the 29EE512-U410 will be different also then.
Can you read this flash?

yes i can read it ,in my ecu i have the "Atmel AT29C512 PLCC32" but is same block memory with "SST" Manufacturer
wait me one day sent to you it's dump




ive got orange5 and omega orange, I will check if the omega can read it, is the id46 key data in this processor , someone recons its got an immo box, but ive looked and cant see any just found a small box that tango says is a immo amplifier, that u400 chip can it be read as a 95040, is there key data in there, or will this corrupt it if I try to read?
thanks for the help so far

give me the part number of the ICI "U400" to help you

[raptureready]

the part no for the u400 is f / 838af / 25co4 / ue this is whats on the chip
kind regards

[PIC18F2550]

the part no for the u400 is f / 838af / 25co4 / ue this is whats on the chip
kind regards

yes can you read the 25c04 by "Atmel AT25040" or "ST M95040" , try to read it and save your orinal bump and test my dump
if no work i to give dump of AT29C512 PLCC32

[raptureready]

hi there
I read the chip, attached is the dump, looks like it might have keys in dump, E7 74 EC 13, and 57 6E EC 13 I am not sure, could someone have a look please, or is the keys in the st chip 29ee512, I haven't tried the immo off file yet, would like to write key in if possible
kind regards

[PIC18F2550]

hi there
I read the chip, attached is the dump, looks like it might have keys in dump, E7 74 EC 13, and 57 6E EC 13 I am not sure, could someone have a look please, or is the keys in the st chip 29ee512, I haven't tried the immo off file yet, would like to write key in if possible
kind regards

your dump is good rend, but I can't help you to program your key
try my file immo off to start your car then you have time to look how you program your key
good luck friend

[raptureready]

thanks pic18f2550
could you possibly send me the dump of the flash 29c512, in case the immo off does not work, then I can try today both if I can, because of time difference, all the best

[raptureready]

I tried the immo off file and the immo light doesent come on at all which I think is correct, it use to flash 3 times and go out, the engine cranks but no spark, also another thing I cant connect with mvp or avdi via obd to ecu, any ideas where I can look, I think I need to do the flash chip next then out of ideas , anymore advice appreciated

[PIC18F2550]

I tried the immo off file and the immo light doesent come on at all which I think is correct, it use to flash 3 times and go out, the engine cranks but no spark, also another thing I cant connect with mvp or avdi via obd to ecu, any ideas where I can look, I think I need to do the flash chip next then out of ideas , anymore advice appreciated

plase wait me for the flash 29c512 what I expect adapter to read it

for no spark, if can you check the "Engine speed sensor / Camshaft position sensor / it's wires if good and no cut" ?

can you scan and give us the "fault code" ?

[PIC18F2550]

here is the file eeprom at29c512 265114 good luck

[autoenthu]

Hello rapture did you start the Hyundai atos, I have the same ecu, no 95040! could you please tell me how did you start?

[raptureready]

never got it started, customer took ecu back to scap yard, I think he got another ecu with a working key, never heard again , sorry

[obeidi]

there is a firmware
Hyundai Athos 1.0
there is no eprom