elcarpuz
17th June, 2014, 06:34 PM
Hi friends,
I have dead ecu c30 AMG A 612 153 79 79 cr2.70 3.0l 0 281 012 244 made in spain 13.07.07 HW 46.01 SW 28.04 (strange date, c30 AMG was make 2002-2005, i think not the first ecu car) and my C30 AMG is year 2004
i find ecu second hand c30 AMG 2004 A 612 153 60 79 cr2.70 3.0l 0 281 011 482 made in germany 13.08.04 HW 46.01 SW 17.03 (I think not same reference bosch and mercedes but same HW with old SW)
Possible it works?
-------------------------------------------------------------------------------------------------
Story
last week i test chiptune c30 AMG with magpro by OBD, don't work, with galletto connection was ok...
Magpro helpdesk says to me desolder 29F400 to chiptune, i do, but after car don't start, i program ORI in 29f400 and:
-Car start and stop after 1 or 2 km, test restart, ok for 30 seconds and after stop again, never restart...
Go home connect ecu to galletto, communication OK, do all solder verify with multimeter, nothing
i think ecu is dead with flux short circuit when solder flash, can see smoke, yesterday can see again smoke, clean all but problem is always here
I have dead ecu c30 AMG A 612 153 79 79 cr2.70 3.0l 0 281 012 244 made in spain 13.07.07 HW 46.01 SW 28.04 (strange date, c30 AMG was make 2002-2005, i think not the first ecu car) and my C30 AMG is year 2004
i find ecu second hand c30 AMG 2004 A 612 153 60 79 cr2.70 3.0l 0 281 011 482 made in germany 13.08.04 HW 46.01 SW 17.03 (I think not same reference bosch and mercedes but same HW with old SW)
Possible it works?
-------------------------------------------------------------------------------------------------
Story
last week i test chiptune c30 AMG with magpro by OBD, don't work, with galletto connection was ok...
Magpro helpdesk says to me desolder 29F400 to chiptune, i do, but after car don't start, i program ORI in 29f400 and:
-Car start and stop after 1 or 2 km, test restart, ok for 30 seconds and after stop again, never restart...
Go home connect ecu to galletto, communication OK, do all solder verify with multimeter, nothing
i think ecu is dead with flux short circuit when solder flash, can see smoke, yesterday can see again smoke, clean all but problem is always here