View Full Version : Can help me with w211
Porelo
17th June, 2014, 10:51 PM
Can help me with fault C2359 Maintenance exceeded?
First I tried to clear it by reset all the 3 lines in Developer mode , but didn't help.
If somebody has any new information or idea, please don't be shy to let me know! :-)
Ps: The mechanics is okay and all pressures too, hangs well and does abs screen is not red and no buzzer
Cheers!
Meat-Head
18th June, 2014, 07:46 AM
ON/OFF TOPIC:-
Rumor states vehicle manufactors are making cars so if exceed service by 5 miles goes to limp dick mode.
legand has it, and can keep it, HAS to be done via Passthru .
UNCONFIRMED RUMOR - BELEIVED GRNUINE (iShit Failiure)
Porelo
18th June, 2014, 09:53 AM
please some help
peko
18th June, 2014, 10:22 AM
have you checked assyst service, because i already see milmeage from dash 100000km and assyst service with 125000 , rsult you can't reset service ligth because dash is down as assyst
check your assyst list
Porelo
18th June, 2014, 12:27 PM
thanks, peko
assyst checked this service ok
Porelo
18th June, 2014, 04:12 PM
help, I'm almost giving in crazy
peko
18th June, 2014, 07:48 PM
sure your assyst have mileage stored, you not erase ultimate service using DAS ?
smayer
18th June, 2014, 11:00 PM
You need reprogram SBC unit, use AVDI.
Porelo
19th June, 2014, 12:16 PM
I have not, AVDI it is possible to do in development mode?
in assyst's OK
Porelo
19th June, 2014, 05:15 PM
problem solved
Thanks PAVLOS2
genius76
19th June, 2014, 06:38 PM
What vas what?
Porelo
21st June, 2014, 09:29 PM
Initial startup after repair
Perform the entire procedure described in Orbem.
Do not forget the thanks button !
Porelo
265086
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.