Help please, to do Personalization with star diag for ML320 !

[electrones]

Someone can help me to do Personalization with star diag for ML320 v6 please!!!
I have use emulator "start error", i need some to finished.
I'm newbie in use star diag, bought a star diag, but i'm still exploring "early stage"
I appreciate any assistance

Cheers

[electrones]

Any help please!!!

[mercis]

ECM is Motorola, 4E28B HC11E9
52PLCC write from 019(01A): E4 AA 79 37
FE if engine won?t start, then it is needed to
clean addresses from 019 to 01d on FF (ETL
619 to 61E) and make personalization by tester
HTT or Star Diagnostic because engine must
work 60 seconds, to finish coding.
go to coding,ecu change

[electrones]

ECM is Motorola, 4E28B HC11E9
52PLCC write from 019(01A): E4 AA 79 37
FE if engine won?t start, then it is needed to
clean addresses from 019 to 01d on FF (ETL
619 to 61E) and make personalization by tester
HTT or Star Diagnostic because engine must
work 60 seconds, to finish coding.
go to coding,ecu change

THANK YOU MERCIS

You can take a look if I made ​​the change correctly please!!!

[electrones]

Hi friends

I wrote 019 (01A): E4 79 AA 37 FE, but the engine did not work, to our friend had provided.
I wish someone would help me in adapting / customization ecu with the emulator.
I bought the DAS but I'm still exploring, I would like someone to explain to me in steps how to do this.
Thanks in advance.

[electrones]

Hi friends

Does any humble and knowledgeable in Diag. Mercedes Benz can help a beginner in diag. for mercedes Please!
I have write as the Merci master said but did not work "not start engine directly".
Tried FF to adapt ECU but, i think did not Correctly process, because the "start error" disappeared but after trying to start engine reappeared on the panel.
Annex changed files.
Thanks in advance

[bram380]

Try this dump:

[electrones]

Try this dump:

Hi Bram

One question is to use your dump with emulator or without emulator!?


No more, I thank you once more, for your cooperation.

[buga37]

Did you start the car? I'm working on the same vehicle, no luck so far

[buga37]

can someone help me to get this immo bypass working, tried both way non is working
1999 ML320 163
ecu 0261206053
mcu HC11E9

[electrones]

Did you start the car? I'm working on the same vehicle, no luck so far

Dear friend
Not yet, i have tried various procedures but without success.

[MS1]

One question is to use your dump with emulator or without emulator!?


No more, I thank you once more, for your cooperation.

What type of emulator you using

I never try a emulator on this vehicle but can help to make working with a aam and key.

[buga37]

What type of emulator you using

I never try a emulator on this vehicle but can help to make working with a aam and key.
thats what we are talking about

[electrones]

thats what we are talking about

This emulator from ecutool not worked for me
I have tried for CR2 and CR1 never worked.
For ML 270 cdi i have tested with emulator from ecuvonix and worked beautifully, for CR1 yet doesn?t worked.

[electrones]

Try this dump:

Dear bram380 i have not reported before because i had not tested your file yet.
I stopped working on the ML320, because i needed to fix other cars so you can get some $ $ $ for the operation.
The owner of ML320 was absent, but will return in a few days.
I wrote your file with the adaptation Das Star but got this error.

Thanks in advance

[electrones]

Some suggestions, from expert on mercedes!!!

Thanks in advance
Cheers

[HECTOR RODRIGUEZ]

DEAR YOU PROBLEM HAVE SOLUTION??

[ibratex]

DEAR YOU PROBLEM HAVE SOLUTION??
I have same problem did you solve ??

Sent from my SM-G900H using Tapatalk