PROBLEME WHIT EZS W169 2005YEAR

[newgeniehex]

HELLO
i have change the mileage os the ezs whit rosfar R260 clone i have this tool since 2010 whitout any probleme
yesterday i have reset the EZS to ZERO rosfar show XXXXX before i change the mileage i know it is normal
i have already change the mileage 3 time for this modele whitout probleme
the car is automatic box
now the car don't start but i can open and close the the door whit the key
i have put the original dump in the ezs and now i have nothing ,,,,???he mileage come back and i can open the door
what is the problem
i have verifie the soldering all is ok
thank in advance
regard

[mercis]

check micro switch

[vageric]

does key turn while in ignation?
think your flash is partial corrupt

[newgeniehex]

HELLO
thank to all
i don't undestand what is :check micro switch
i put the picture

but when i have try to write new mileage whit rosfar clone i have a error for writing!!????
i have restart the soft and i can read and write
i have orinal file can i put in another same ezs
where i can buy it
i find nothing in ebay or other weeb site
need help please

[vageric]

i think find a flash with same number as you ezs have and write
then see what happend first

[newgeniehex]

hello
Some one have a virgin flash and eeprom for this ezs please
regard

[honingkoning]

HELLO
i have change the mileage os the ezs whit rosfar R260 clone i have this tool since 2010 whitout any probleme
yesterday i have reset the EZS to ZERO rosfar show XXXXX before i change the mileage i know it is normal
i have already change the mileage 3 time for this modele whitout probleme
the car is automatic box
now the car don't start but i can open and close the the door whit the key
i have put the original dump in the ezs and now i have nothing ,,,,???he mileage come back and i can open the door
what is the problem
i have verifie the soldering all is ok
thank in advance
regard

Next time program dash 2 times instead of risking a dead ezs.
First write 999999 in dash, put back in Car and put Ignition on.
Then make correct milleage, Same result as writting ezs with rosfar.

Wbr Adam.

[vageric]

i have already change the mileage 3 time for this modele whitout probleme
the car is automatic box

regard

seems you already have the flash and eprom for this car

[fruti]

Yup this ezs is special ... i think noone here can change mileage in this ezs and that car will work. The only solution is to put in 999999. Even if car start with right mileage .... when you drive cople km and turn off engine, car will not start again.
Everytime you do that you have to put 999999 in this model.
Try to give back original and start car. Then put 999999
Regards

[ecupro]

Please if someone tell how to remove needles on this dash, is it necessary to remove needles, I have carprog, is this possible without remove needles or if someone have wiring diagram to do this dash, thanks.
265257265259

[rukartinatv]

Hello.can you explain how you after
999999 in ezs in the dash put new miles and its will stay
not jump to 999999miles?
this method will work only if you do with right programer
and 2nd time when you put new miles you block miles between dash and ezs.
So if posable to do it this way
then we can do mb w166 your way.

[ecupro]

Solved for needles very very easy, thanks.

[ecupro]

Thanks Fruti and Adam, I am don't know about this method but now tested and your solution works perfect, regards.

[ecupro]

Hello.can you explain how you after
999999 in ezs in the dash put new miles and its will stay
not jump to 999999miles?
this method will work only if you do with right programer
and 2nd time when you put new miles you block miles between dash and ezs.
So if posable to do it this way
then we can do mb w166 your way.

Friend this works, just tested without any special programmer read eeprom by carprog and modified like that, work perfect.

[rukartinatv]

Only for this car?
what about mb w166

[fruti]

Rukartinatv .... ONLY FOR W169!!
W166 is new car ... this one we use other methods.
Regards

[newgeniehex]

hello
inside the mcu is 9s12dg128 mask 3L40K
This solution work only if the ezs have 908 inside!!before change km in the dash and flash it whit tacho universal
some one have a flash file for this ezs whit this mask
thank in advance
regard

[rukartinatv]

There is no methode for W166
blocker only.

[javyb]

Next time program dash 2 times instead of risking a dead ezs.
First write 999999 in dash, put back in Car and put Ignition on.
Then make correct milleage, Same result as writting ezs with rosfar.

Wbr Adam.

So you change mileage to 999999 put dash in car then take dash out and write the miles needed and connect and the car will show this mileage? Will this work on b class? W245

[ecupro]

There is no methode for this car.
blocker only.

Yes man, I am write here, I am tested today this method, put 999999, then connect to car and put ignition on, after that I am put new milege and works perfect. This is for w169.

[honingkoning]

So you change mileage to 999999 put dash in car then take dash out and write the miles needed and connect and the car will show this mileage? Will this work on b class? W245

Yes this is a tested method, but you have to open dash and make good backup.
Change milleage to 999999 by eep, put dash on Car turn on Ignition.
Than open dash again and use your ori dump with new required milleage.
Other wise you Will keep 9999999 on dash because the line underneath the km line changes.

Wbr Adam.

[honingkoning]

So you change mileage to 999999 put dash in car then take dash out and write the miles needed and connect and the car will show this mileage? Will this work on b class? W245

Yes this is a tested method, but you have to open dash and make good backup.
Change milleage to 999999 by eep, put dash on Car turn on Ignition.
Than open dash again and use your ori dump with new required milleage.
Other wise you Will keep 9999999 on dash because the line underneath the km line changes.

Wbr Adam.

[newgeniehex]

HELLO
ok but i canot turn of ignition!!!!
i think the flash is corupted
some one can repair my flash please regard
read buy R270
thank in advance
regard

[peko]

HELLO
ok but i canot turn of ignition!!!!
i think the flash is corupted
some one can repair my flash please regard
read buy R270
thank in advance
regard

sure your flash is corrupted !
just write flash from another ezs and car go away ;)

[newgeniehex]

helppppppppppppppppppp!!
i need flash please
regard

[karalada]

Flash is fine.
Search problem elsewhere-Solders,missing items.

[newgeniehex]

hello
thank to all
my probleme is solved
mechanical problem
when I got the keys in the EZS the sensor does not pushing the microswitch that triggered the EZS!
regard

[TULGEYWOODMAN]

Please if someone tell how to remove needles on this dash, is it necessary to remove needles, I have carprog, is this possible without remove needles or if someone have wiring diagram to do this dash, thanks.
265257265259

Twist off.............

[ecupro]

Twist off.............

This is solved I am already done this, thanks.

[d.zio]

hello to all mates......my first w245 b class.....is it safe method to do dash 999999 and then the correct km? 24c32 inside dash......i dont want to do ezs but as knowledge can i read this with upa?any help appreciated...thanks

[cokolo]

hello to all mates......my first w245 b class.....is it safe method to do dash 999999 and then the correct km? 24c32 inside dash......i dont want to do ezs but as knowledge can i read this with upa?any help appreciated...thanks
UPA cant read security lock procesors , Motorola .....

[d.zio]

thanks friend for the answer...about the 999999 method on dash?

[d.zio]

can anyone set 999999 to my eeprom please?

[vageric]

can anyone set 999999 to my eeprom please?

first you have to learn to state the originale mileage.
second you can try this if you Original mileage is 210464km

[d.zio]

thanks friends....tested your solutions