PDA

View Full Version : Passat cc dash 24c64 nec error


feketezsolt
23rd June, 2014, 11:12 PM
Please help me.
I tried to change mileage on passat cc 2011 with 3C8920880j 24c64 nec color tft dash with svdi commander .Now i have error on dash.
vcds tell eeprom checksum error
I need 165245 km
Thanks.
chriskross
24th June, 2014, 05:22 AM
rewrite km with a professionel tool and problem is solved
feketezsolt
24th June, 2014, 06:24 AM
I have only svdi and with that not worked :blue:.
lupu_sandu
24th June, 2014, 10:43 AM
Then call someone who have a good tool.
peko
24th June, 2014, 10:54 AM
I have only svdi and with that not worked :blue:.

you use original tool or clone ?
lupu_sandu
24th June, 2014, 11:18 AM
Damn browser...
feketezsolt
24th June, 2014, 07:46 PM
Please ,help me .
lupu_sandu
24th June, 2014, 09:59 PM
Where from Romania are you?
betrescudan
24th June, 2014, 10:05 PM
HMM...WHAT DO YOU ASK HERE?....LOOK AT THE NAME....:giveup:
lupu_sandu
24th June, 2014, 10:13 PM
I try to help on this guy. So if the name point that is Hungarian must be from west border? I don't understand from you sentence.
betrescudan
24th June, 2014, 10:23 PM
IT MUST TO BE FROM TRANSILVANIA...DO NOT UNDERSTAND OTHERS THINGS...AND I LIVE LIKE STRANGER IN ANOTHER STRANGE COUNTRY...AND I HAVE MANNY HUNGARIAN FRIENDS
feketezsolt
25th June, 2014, 07:26 AM
Yes ,I live in Transilvania
betrescudan
25th June, 2014, 07:38 AM
i am from fagaras-brasov...peace brother
lupu_sandu
25th June, 2014, 09:24 AM
If you don't resolve your problem, contact me on Skype or PM.
soxten
24th September, 2014, 11:33 AM
SVDI/FVDI, always desolder and read Eeprom 24cXX and save as original.bin
Then enter "service mode" directly or by load Eeprom file and then save and program back to dash and after that enter "Service mode"
I sometimes get "error" but then I program Eeprom to original agin and start dash and enter "service mode" and do programing.
Sometimes it`s a hell to get in to dash, but always save Eeprom_original.bin

Lupu_sandu is a king on dash! he has help me many times!
autofan1965
24th September, 2014, 03:53 PM
SVDI/FVDI, always desolder and read Eeprom 24cXX and save as original.bin
Then enter "service mode" directly or by load Eeprom file and then save and program back to dash and after that enter "Service mode"
I sometimes get "error" but then I program Eeprom to original agin and start dash and enter "service mode" and do programing.
Sometimes it`s a hell to get in to dash, but always save Eeprom_original.bin

Lupu_sandu is a king on dash! he has help me many times!

Passat dont need any preparation because there is no immo.