PDA

View Full Version : smart fortwo bsi and upa


yeager
24th June, 2014, 07:48 AM
Hi
Can anyone help me, how to connect upa to this bsi? It is needed lift up any pin?
Mcu 68hc05x32
Mask 1d69j
andy99
24th June, 2014, 08:57 AM
Read help the UPA. And lift IRQ and Reset.
yeager
24th June, 2014, 12:41 PM
i lift up reset and irq, but after try ead, i get "device silent" .... something is wrong :(
yeager
24th June, 2014, 05:47 PM
i lift up pins:
19 - PD4
21 - PD3
30 - RST
31 - IRQ

but when i try read, get error Vpp out of range, and on IRQ is 16V, i meassure it whit voltmeter and on it is 12V, can anyone tell me wher can be the problem?
jjas40
24th June, 2014, 07:34 PM
last week I had one and I could not read upa.
but if I could smoothly with x-prog.
I desolder the mcu.
yeager
24th June, 2014, 08:34 PM
ok, i desolder it, but "bypass security" take a long time, after a 30s i stop it is it normal?
yeager
25th June, 2014, 11:25 AM
noone can help me? how many time i must wait? 1-2 min or more? :(
yeager
25th June, 2014, 12:55 PM
ok, now read work ok, but on write i have problem, always get errors, and chip is not rewrited ..
einet
25th June, 2014, 07:33 PM
by xprog over 30sec. to baypass . I think you burrrn the micro!
zoyzoyni
25th June, 2014, 08:12 PM
mate post more info for exactly what you want repair in smart?maybe another way.xprog-m what version clone or not?cause i have three diferend version+original and it is realy madhouse.in the same prosesors many times it happent to read the clone one and not original, or same pinout replace only device xprog,and i susses to read with the one from the four and not all four.
regards.
yeager
25th June, 2014, 08:13 PM
now read work OK, i change km whit nyo, but i cannot write to it, always get error on writing :(

ps: xprog-m clone v5.0
eiemax
22nd August, 2014, 04:45 PM
Hi friend.
I have the same problem, my xprog, remains stop on bypass security. As you have done to solve the problem?
Thanks in advance
hcip
22nd August, 2014, 04:54 PM
If you have Tacho universal it can easily read and write using smart/Accord cable
eiemax
22nd August, 2014, 05:36 PM
No friend, i have only upa and xprog.
can someone help me?
Thanks
honingkoning
22nd August, 2014, 05:53 PM
No friend, i have only upa and xprog.
can someone help me?
Thanks

Do you use external pwr?
eiemax
22nd August, 2014, 05:59 PM
Yes friend, 12v external power
eiemax
22nd August, 2014, 07:57 PM
anyone can help me for this problem?

Thanks