Xtrend Et4000 Stuck!

[BrunoJ]

Hi have a Xtrend ET4000 and is stuck on the display with a Green and Red light? Any ideas? Try to flash it with USB and still no luck.

Many thanks in advance for any help. :)

[flyingpig]

When you flash from USB make sure the usb stick is formatted correctly. Then disconnect any other usb sticks that you may have plugged in.

Also, it may be worth installing the latest bootloader? Use the ViX Image shouldnt have any problems. Good luck.

FP.

[BrunoJ]

When you flash from USB make sure the usb stick is formatted correctly. Then disconnect any other usb sticks that you may have plugged in.

Also, it may be worth installing the latest bootloader? Use the ViX Image shouldnt have any problems. Good luck.

FP.

USB flash drive (FAT32 formatted)


USB device (E.g. USB memory stick) In the root directory, create a folder et4x00 and copy the following 5 files to that location


Boot.bin
kernel.bin
rootfs.bin
imageversion
noforce ( "force" for automatic Flash.)



This is what i been doing and still no luck.

[foxy6800]

which usb port are you using
I found that front one works better