PDA

View Full Version : Ecu 0281013790 MB Viano Problem!!!



chiptorque
26th June, 2014, 11:02 AM
Hello I have a problem with the ECU. When writing the modified flash DPF by BDM and correct Fgtech Chekcsum with V54. No start and now has communication by OBD. or with the original reading. I have understood that takes virtual eprom, but as it has been blocked? anyone can help me? in an industrial vehicle and has to work. thanks for everything.





P. D. I leave Original files and MODS

imcumen
26th June, 2014, 12:23 PM
you tried to write the original file with BDM ?

imcumen
26th June, 2014, 12:47 PM
write with your fgtech the original file named 0281013790_ORIGINAL_All
the car should START

Joe019
26th June, 2014, 06:37 PM
Sorry m8, but you broke the ECU.... this ecu is very very very sensitive when its opened. Some brokes when its opened....

chiptorque
28th June, 2014, 09:31 AM
thanks for your help, I tried to record the original again and as usual, will not start. open and we have been very careful. when quitaas may change something in the ECU immobilizer and there is this problem? File any virgin?

Joe019
30th June, 2014, 08:13 AM
ITs not a dump problem, its a hardwre problem when you opened it, the ecu briked...

chiptorque
1st July, 2014, 08:48 AM
I have opened many such exchanges without any problem when opened. if the problem is communication, it may be some physical hardwarre driver?