pinout W209 R270

[hackbest]

Hello desire for this pinout for R270 W209 thanks and greetings.

[autodigitec]

Isnt this just like w203?
EDIT: It's not.

Check this pic from ak500pro, if you use it check wire numbers not colours.

Is this your board?

http://i.imgur.com/Wpqe3ia.png

[THeFOg]

Thank you for your help

I have the same one C209 W209 how can i read it with the R270?
My question is which mask do i choose ?
1K79X only give me CAS information !?!

Any help or advice will be appreciated.

Thx M8`s

[autodigitec]

I can check later today in office

Enviado do meu ZP998 atrav?s de Tapatalk

[promileage]

http://www.digital-kaos.co.uk/forums/f174/r270-new-software-1-20-a-266618/index5.html#post1689733
R260 = R270

Purple = 19
Yellow = 7
Green = No Connect
Red = 1
Black = 26

coaxel wires
black = 24
white = 8

[THeFOg]

Thank you so much. So after I make the connections just choose the 1K79X mask and read it regardless it says for CAS ?

Thank you m8


Thank you for your time

[promileage]

I see only two type mask in these EZS 1L59W & 4L40K .

[PETAR]

what part number is ezs?

[THeFOg]

209 545 19 08


Thank you for your time

[ttzag]

4L40K 100%

sent from LG_G2

[PETAR]

i too think 4l40k

[THeFOg]

Thank you m8's for all the help, so after my connections, I need to choose mask 4L40K from the R270 menu and read it?

Thank you again m8's


Thank you for your time

[THeFOg]

The m8's
From the AK500 picture it look like 1K79X mask rather than 4L40K mask?!?
This unit is an experiment anyway I will follow your instruction and post back. Thank you for your help m8's


Thank you for your time

[ttzag]

This from r270




sent from LG_G2

[THeFOg]

Thank you m8 R270 read it perfectly. If you don't mind m8's all I need is a good advise on which tool to get to make the benz keys, if you don't mind. I start getting calls for them quite bit now hate to turn them away. Thank you for all your help m8's. Have a nice day


Thank you for your time

[autodigitec]

you need something to write hc05e6 (old big keys), like xprog/upa

and some kind of mercedes nec programmer. Shouldn't be too expensive.

[THeFOg]

Thank you.

I got orange5 to write HC05, so my next purchase is a NEC programer - sweet, I saw that AK500 can reset the used benz IR keys (Black/Chrome) by resetting the NEC is that a common feature on all of the NEC programers ?
Do I need also a IR programer or just the NEC will do the trick ?

Thank you again in advance.

Have a nice day


Thank you for your time

[autodigitec]

NEC programmers should always be able erase/write. They can be found for around 50usd+shipping.
IR programmer is useful if you want to check if key is transmitting via IR and program keys that were previously erased by NEC programmer.

[ttzag]

Orange5 good choice for reading 705,05,908.
Buy immo hpx software for orange5 u can read some old EZSs in circuit.

[THeFOg]

Got it. Thank you so much m8s. Good luck and prosper


Thank you for your time

[tcgloballtd]

ttzag You are lifesaver! Took me 2 hours to get the EIS out and couldn't find the diagram for R270. God bless!

[HASSANALARM2016]

Please what do you mean coax wire signal

Envoyé de mon SM-J510FN en utilisant Tapatalk