no r232 port

[paulbarker1968]

Hi I recently got a new computer which has no rs232 lead connection, I bought a usb adapter to link up but on the STB Editor i get the following message.

cant open serial port com1
please check if the com port has the following parameters
baudrate: 115200bps
parity: no parity
databyte: 8bit/data
stop bit: 1

Please help as now i have no idea how to flash my 750 kryptview box, many thanks if you can help.

[ManofScience]

what COM port has been assigned to the Serial-USB device ?

[paulbarker1968]

hi imnot sure where to find that out i have 4 in the back and 1 in the front which im using for the rs232 lead

[ManofScience]

no, the software will assign the Serial>USB apator a COM port number when u plug it in, that code shows the software is trying to access COM1.

You'll either have to change the STB Editor software to match whatever COM port number the PC has assigned it OR Change what the COM Port number to 1 to match the software

[MetalKettle]

hi imnot sure where to find that out i have 4 in the back and 1 in the front which im using for the rs232 lead

Have a look in device manager, under Ports.

[paulbarker1968]

many thanks to tou both that worked straight away didnt even realise you could select different ports. Thanks again :congrats:

[MetalKettle]

many thanks to tou both that worked straight away didnt even realise you could select different ports. Thanks again :congrats:

Glad you up and running mate.